Eco OBD2 Chip Tuning Box OBD Car Fuel Saver For Diesel Vehicles

EcoOBD2 Economy Chip Tuning Box For Benzine 15% Fuel Save Plug&Drive OBD 2 Scanner Eco OBD2 With Reset ButtonBlue: Dedicated to diesel vehicles, function: energy saving and emission reduction + power boost.Powerprog NitroOBD2 Chip Tuning Box for Petrol With Reset Button
plug and Drive OBD2 Chip Tuning BoxPowerprog NitroOBD2: More Power / More Torque
Powerprog NitroOBD2 is a Plug & Drive device Ready to run increasing engine performance.
Powerprog NitroOBD2 is easy to install. Just plug it into the car OBD2 connector. Powerprog NitroOBD2 fits all cars since 1996.
It works based on OBD2 ECU protocols remapping the Auto's computer. After driving 200km total road, Powerprog NitroOBD2 fits for the car,
according to the habits of the drivers and always keeps the ECU remapping to increase engine performance.
What Powerprog NitroOBD2 do?
According to your driving habits, Powerprog NitroOBD2 makes a new map on the ECU car's computer to increase the performance of your car.
As the driving a lot more KM / Miles, the map is renewed. Therefore, it keeps the vehicle from increasing power and torque.
What is Powerprog NitroOBD2 Chip Tuning Box?
Powerprog NitroOBD2 is a Chip Tuning Box that can be connected to your car's OBD2 connector to increase your car's performance.
When connected to the OBD2 connector, Powerprog NitroOBD2 receives information from the ECU car's computer. with the data received from the ECU,
Powerprog NitroOBD2 adjusts the boost pressure, fuel quantity, injection timing and pressure to increase the performance of your car.
Powerprog NitroOBD2 Chip Tuning Box does not exceed the manufacturer's requirements. It only works within the motor tolerance.
Powerprog NitroOBD2 discovers the hidden power of your car. Powerprog NitroOBD2 does not damage the engine and computer of the ECU car or does not cause any negative effect for the car factory setting.
Powerprog NitroOBD2 does not change any of the settings permanently. To return to the original car configuration, simply disconnect Poweprog NitroOBD2 from OBD2 connector.
Powerprog NitroOBD2 discovers the hidden power of your car.
-up to 35% more power
-up to 25% more torque
Powerprog NitroOBD2 is very easy to use.
Plug Powerprog NitroOBD2 into OBD2 connector of your car. and turn on the ignition for 30 seconds. and Turn the engine running.
Powerprog NitroOBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle,
there may be no need to make an additional adjustment. Powerprog NitroOBD2 will recognize your vehicle and your driving habits after about 200 km / 150 miles of driving,
And then Powerprog NitroOBD2 adjusts to match your car perfectly.
Powerprog NitroOBD2 works on the basis of changing the shape of the ECUS signal. as a consequence, the entire injection map changes.
The main difference between Powerprog NitroOBD2 Box tuning and Reassignment of Chip Tuning methods is that Powerprog NitroOBD2 Chip Tuning Box is easily removable,
and after unplugging, return to factory settings. EcoOBD2 is the type of cheap and secure fit.
Reassignment is a permanent change to your car. This is the tuning face and cannot be removed.
Powerprog NitroOBD2 is equipped with the engine protection function and 100% safe for your car engine.
Powerprog NitroOBD2 produced on the printed circuit board in SMD technology. Powerprog NitroOBD2 Chip Tuning Boxes are of high quality.
Installation and Calibration
1-Pull the Car Key out of the ignition.
2-Find OBD2 connector (*) in your car and EcoOBD2 Plug
3 Insert the key into the ignition and turn the key to the first stage. (do not start the car)
4-Press the button for about 5 sec. After releasing the button, just wait for a long time about 30-54 sec. (EcoOBD2 will communicate and establish a connection with the ECU)
5-Start the engine.
6-EcoOBD2 will recognize your vehicle and your driving habits, after about 200 km / 150 miles of driving and therefore EcoOBD2 adjusts to match your car perfectly for more fuel savings.
Each device available for LPG.
Does your car have OBD2 connector?OBD systems are designed to monitor the performance of some of the main components of an engine including those responsible for controlling emissions.
necessarily for OBD2 cars:
(*) Where do you find OBD2 connector in the car?
1 on the Driver's side, under the dashboard, in the area under the direction
column,
2 on the Driver's side, below dasboard, between the driver's side door and the steering column area
3 on the Driver's side, under the dashboard, between the steering column area and the center console
4 Driver's side, dashboard instrument / area meter, between the steering column and the center console


a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a