Dual s Digital Oscilloscope M Sampling Rate 10Mhz Analogue Bandwidth Lissajous Patterns 6A Current Waveform Measurement

Dual oscilloscope with M sampling rate, 2MHz actual bandwidth/10MHz analog bandwidth. With complete trigger functions (single, normal, automatic), both periodic analog signals and non-periodic digital signals can be freely used. Waveform measurement display function, 3.2-inch LCD display, 320 * 240 resolution, three display modes design, you can easily adjust to dual- oscilloscope mode, XY model, and current waveform display. 6A current waveform measurement, 20K storage depth, support waveform compreion expansion. With multiple expansion functions, and support firmware upgrades.

1. Dual oscilloscope with M sampling rate, 2MHz actual bandwidth, and 10MHz analog bandwidth.

2. With complete trigger functions (single, normal, automatic), both periodic analog signals and non-periodic digital signals can be freely used.

3. Wide measurement ranges design, supports measurement of voltage signals up to ±400V.

4. Waveform measurement display function, 3.2-inch LCD display, 320 * 240 resolution, three display modes design, you can easily adjust to dual- oscilloscope mode, XY model, and current waveform display.

5. Equipped with efficient one-button AUTO, without cumbersome adjustment to display the measured waveform.

6. 6A current waveform measurement, 20K storage depth, support waveform compreion expansion.

7. Current waveform steple compreion, the maximum compreion times 100 times, can be compreed arbitrarily to display the current change curve.

8. Diversified use, the use of a wider ranges of areas, home appliance repairs, cellphone repairs, automotive repairs, electronic interest in DIY research and development, power source repairs, and so on.

Name: Digital Oscilloscope

Material: plastics+metal

Battery: 1 * 20mAh battery (included)

Sampling rate: M/

s: 2

Analog bandwidth: 10Mhz/

Actual bandwidth: 2Mhz/

Measured voltage: X1/±40V, X10/±400V

Input impedance: 1ΜΩ

Storage depth: 20Kb

display: 12

Current ranges: 0-6A

Minimum precisions: 2mA

Sampling rate: 2.5KSa/S

Reveal: 3.2" LCD

Resolution: 320*240

Charging voltage: 5V

Working hours: 4.5-6h

Firmware upgrade: Support

Item size: 120 * 66 * 18.5mm / 4.72 * 2.60 * 0.73in

Package size: 230 * 160 * mm / 9.06 * 6.30 * 1.97in

Note: It supports the use of additional modules for signal , audio signal display, transistor testing, and other functions, but these modules have not yet been launched for and are not included in the shipping list. Please be patient and wait for us to sell them. Please follow our store as we will sell these modules by the end of August 2023.

SET1:

1 * Digital Oscilloscope

1 * USB Cable

2 * Alligator Cable

OR

SET2:

1 * Digital Oscilloscope

1 * USB Cable

1 * Alligator Cable

1 * High Voltage Probe

OR

SET3:

1 * Digital Oscilloscope

1 * USB Cable

2 * High Voltage Probe