Dual M.2 NVME SSD RAID Array Mobile Hard Drive Enclosure PH8586R

GH₵ 2,429.00

GH₵ 3,470.0030%

In stock

Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 170.03 to Tema

0 out of 5

(No ratings available)

Promotions

Enjoy cheaper delivery fees when you select a pickup station at checkout Free Delivery in Accra and Kumasi for Orders above GHC120. Pick-up stations only! (Excluding Large)

Report incorrect product information

Delivery & Returns

Shipped from abroad

Choose your location

Pickup Station

Delivery Fees GH₵ 179.55

Ready for pickup between 09 December & 12 December when you order within next 5hrs 3mins

Door Delivery

Delivery Fees GH₵ 191.45

Ready for delivery between 09 December & 12 December when you order within next 5hrs 3mins

Postal Shipping

Delivery Fees GH₵ 170.03

Ready for delivery between 30 December & 13 January when you order within next 5hrs 3mins

Return Policy

Free return within 15 days for all eligible items.Details

Seller Information

gaochang

94%Seller Score

9 Followers

Seller Performance

Shipping speed: Good

Quality Score: Excellent

Customer Rating: Excellent

Product details

Dual M.2 NVME SSD RAID Array Mobile Hard Drive Enclosure

1. Support capacity: 4TB
2. Transfer interface: USB2.0, USB3.0, USB3.1, USB3.2, USB4
3. Transmission speed: 20Gbps
4. Master control: JMS586R
5. Power interface: Type-C
6. Suitable for multiple SSD specifications: M.2 NVME 2230 2242 2260 2280
7. P1/P2 SSD indicator: green light on when SSD recognition is normal, green light blinks when reading and writing data, red light blinks when SSD is faulty
8. Size: about 10.6 x 5.7 x 1.7cm
9. Weight: about 168.8g
Features:
1. Mobile storage, convenient, Type-C data interface, compatible with computers, tablets, cell phones
2. Quiet cooling fan, accelerate the hard disk cooling, make the operation more stable
3. Misdialing, mistakenly touching RAID mode and RESET will not change the array, press and hold the RESET button and then turn on the power to change the array
4. RAID1 mode switch to PM mode, split into two independent disks, one of the disks in the offline state, enter the disk manager to offline disk online, RAID1 mode data still exists in the two disks
5. 5 minutes, no data read and write, the device enters the automatic sleep state, reduce power consumption, protect the life of the hard disk
6. Replacement of SSD specifications can be installed directly, without opening the board, convenient and fast
RAID mode setup steps:
1. Install the SSD, plug in the data and power cables, and then turn off the power
2. Set the RAID mode to the desired position
3. Press and hold the reset button, then turn on the power switch and release the reset button after 3s of beeping
4. After the RAID setup is complete, you need to enter disk manager for initialization
5. Note: data will be lost when switching RAID modes, so please be careful
6. Suggestion: backup your data before switching RAID mode
Installation steps:
1. Open the bottom cover
2. Insert the SSD into the M.2 NVME connector at an angle of 45 degrees
3. Attach the removab