DSO1511G 120M 2.4-inch Screen Digital Oscilloscope 120MHz Analog Bandwidth Support Signal

This is a kind of quty oscilloscope, with 120M bandwidth and 0M sampling rate, more stable and with higher precisions. 14 measurement options available, Frequency, Peaks-to-Peaks, Duty cycle, Amplitude, RMS, Average, Period, + width, - width, Max, Min,Top, Base, -Duty cycle. Support switch the output waveform: sine wave, square wave, triangle wave, etc. Widely application on mcu debugging, car repair, home appliance repair, DIY electronic competition, power-supply debugging, inverter, etc. You can have a try.Features:Resolution:Equipped with 320*240 resolution color display, with bright colors and high contrast, you can see the data clearly.Bandwidth and sampling rate:With 120M bandwidth and 0M sampling rate, more stable and with higher precisions.High bandwidth:Up to 120M bandwidth can easily cope with measurement tests in various fields.There are 14 measurement options available as follows:Frequency, Peaks-to-Peaks, Duty cycle, Amplitude, RMS, Average, Period, + width, - width, Max, Min,Top, Base, -Duty cycle.Support switch the output waveform: sine wave, square wave, triangle wave, etc.FFT:FFT is used to convert time domain waveforms into frequency domain and is widely used in harmonic analysis and other fields.Support three display modes:logarithmic, linear, and music spectrum.Reference waveform:you can measure the waveform first, lock the current waveform on the screen, and the normally refreshed waveform will not be affected. Reference waveforms are useful for single- oscilloscopes. With reference waveforms, you can easily compare the waveforms of two s.Complete trigger:Trig mode: Auto/Normal; Trigger types: Rise/Fall, Trigger level: Manual/AutoVertical sensitivity and time base:The scope's vertical sensitivity is ranges from 10mV/div to 10V/div (1X ranges). The oscilloscope time base is ranges from 5ns to 10s.Waveform save:One-click to save the screen waveform, and also support delete or browse historical screenshots..Connect to PC:The screenshot pictures can be exported to a computers via a USB connection.Video output:The 3.5mm headphone jack at the bottom can output AV video simulating signal, which can be connected to a TV or .Power-supply:built-in rechargeable lithium battery, 3.7V, 3000mAh large caparity, full-charged can provides long working time.Compact size:lightweight and portable, also can be used as a portable tool for on-site debugging.Widely applications:suitable for mcu debugging, car repair, home appliance repair, DIY electronic competition, power-supply debugging, inverter, etc.Specicifations:Name: OscilloscopeModel: DSO1511GColor: green(optional)Battery: 1 * 2.5V, 3000mAh battery(included)s: 1Screen size: 2.4 inchMeasurement: 14 typesResolution: 320*240Bandwidth: 120MSampling rate: 0MRise time: