DSO1 Digital Oscilloscope Portable 1MSa/s 200KHz Analog Bandwidth Support 80KHz PWM Firmware Update Oscillograph DIY

DSO FNIRSI-1 Digital Oscilloscope

This DIY digital oscilloscope kit adopts ARM Cortex- proceor and with 2.4-inch TFT screen and protective case. It's easy and reliable for circuit operation. It can display waveform s, such as frequency, period, width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Features:Adopt ARM Cortex- proceor , and include a 2.4-inch color TFT display screen.Used for secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.Come with instructions, easy to install and operate.With Auto/Normal/Single trigger modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous waveform before trigger(negative delay).With waveform digital display, including frequency, period, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Short-circuit and open-circuit : can help the user find out the error.TFT controller recognition function.The SMD has been soldered, more suitable for electronic beginner.Specifications:Maximum Real-time Sampling Rate: 1MSa/sAnalog Bandwidth: 0-200KHzSensitivity Range: 5mV/div-20mV/idvMaximum Input Voltage: Vpk (1X probe)Input Impedance: 1M ohms/20pFAccuracy: 12 BitsRecord Length: 1024 pointsCoupling Modes: DC / AC / GNDTime Base Range: 0s/Div - 10us / DivTrigger Modes: Auto, Normal, and SingleTrigger Position: Center of erSupply Voltage: DC 9V(8-10V)Current Consumption:~120mA @ 9VMain Board Size: 94 * 65mm / 3.7 * 2.56inAnalog Board Size: 65 * 47mm / 2.56 * 1.85inScreen Size: 52 * 40mm / 2 * 1.57inPackage Size: 14.5 * 10 * 3.7cm / 5.7 * 3.94 * 1.45inPackage Weight: 179g / 6.33oz

Package ListA:1 * Digital Oscilloscope DIY Kit1 x BNC clamp1 * User Manual(English)

1 * With or without power plug,EU or US type  (Optional)

Package ListB:1 * Digital Oscilloscope

1 * Probe1 * User Manual(English)

1 * With or without power plug,EU or US type  (Optional)

Packing list C:

1X oscilloscope

1 x BNC clamp

1 * probe

1 * User Manual(English)

1 * With or without power plug,EU or US type  (Optional)