DSO-TC3 TC2 Digital Oscilloscope Transistor Tester Function Signal Three/TwoIn One Multi-function Tester

DSO-TC2 Digital Oscilloscope Tablet USB Transistor Tester 2.5MS/s Sampling Rate 200kHz Bandwidth LCR Detect PWM Out Car

138 PRO Digital Pocket Oscilloscope

138 PRO is a highly practical and cost-effective MINI oscilloscope, which is aimed at the maintenance industry and the R&D education industry.

The oscilloscope has a real-time sampling rate of 2.5MS/s and a 200KHz bandwidth.

With full trigger function (single, normal, automatic),

Works perfectly for both periodic analog signals and aperiodic digital signals.

Voltages up to ±400V can be measured.

Equipped with efficient one-key AUTO, the measured waveform can be displayed without cumbersome adjustment.

The display is equipped with a 2.4-inch high-definition LCD screen with a resolution of 320*240.

Built-in 12mah high-quty lithium battery, a full charge can be used continuously for about 5 hours.

Specifications:

Name:DSO-TC2 digitalOscilloscope

Real-time sampling rate: 2.5MS/sAnalog bandwidth: 0~200kHzCoupling mode: AC/DCTest voltage range: 1:1 probe: 80Vpp(+40v)10.1 probe: 800Vpp(+400v)Vertical sensitivity: 10mV/Div~10V/Div (1-2-5 progreion)Vertical dispment: adjustable and with indicationHorizontal time base range: 10us/DIV ~ 0s/DIV (1-2-5 progreion)Trigger modes: Auto/Normal/SingleTrigger type: rising edge, falling edgeTrigger level: adjustable with indicationWaveform freeze: Yes (HOLD function)Automatic measurements: maximum, minimum, average, rms, peak-to-peak, frequency, period, duty cyclePWM output: frequency: 0~80KHz, duty cycle: 0~100%, amplitude: 5.0V

Package include:DSO-TC2 digitalOscilloscopetester*1P6100 High Voltage Probe*1Test hook*3Adapter*1Normal probe*1Box*1Instruction manual*1Type-C charging cable*1

3 in 1 Mini DSO-TC3 Digital Oscilloscope Portable USB Transistor Tester 10MS/s Sampling Rate 0kHz Bandwidth Meter LCR Detect

Features & Specifications:

【1】DSO-TC3 ingeniously integrates digital oscilloscope, electronic component tester, PWM signal and other functions into one.Equipped with large-size color dot matrix TFT display.Built-in rechargeable lithium battery.Bring more practical functions to users with a small size,Also has good portability.

【2】DSO-TC3 has various working modes such as oscilloscope and component tester.Each time you click the power button, it will enter the mode selection interface.Pre the [Up] and [Down] keys of the direction keys to select,Select “Mos Test” item, pre【OK】key to enter component tester mode;Select the “Oscilloscope” item, pre【OK】key to enter the oscilloscope mode.

【3】"Mos Test" mode can test various types of transistors, and can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance; can test capacitance, resistance, inductance components, etc.

【4】DSO-TC3 is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordle components, and preliminary screening of small batch components."Oscilloscope" mode to test the signal waveform of the circuit.Support online operation with computer, you can refresh the official firmware by yours and complete the upgrade.

【5】It is hoped that FNIRSI-TC3 can make the study and work of the majority of users more efficient and interesting.

【6】On the basis of TC2, DSO-TC3 has increased the test range, for example, the bandwidth of oscilloscope function has increased to 0KHZ. The function of signal is also added.

Package include:

TC3 Standard set

DSO-TC3 *1

Ordinary probe*1

Test hook*3

Type-C charging cable*1

Packing box*1

Manual*1