DSO-TC3 Portable Digital Oscilloscope Transistor Checker Tester Inductance Capacitance Resistance Meter

Portable Digital Oscilloscope Transistor Checker Tester Inductance Capacitance Resistance Meter

Feature:

1. Convenient and 3 in 1: This digital oscilloscope, electronic component tester, and PWM signal function, combined into one. The oscilloscope has a realtime sampling rate and a bandwidth of 0 kHz. Voltage signals up to 400V can be measured.2. Identify Device Type: Oscilloscope mode can test the signal waveform of the circuit, while Mos test mode can test various types of transistors, which can identify device type, pin polarity, hFE, on state voltage, junction capacitance, resistance, inductive components, etc. Signal mode, you can use sine, , triangular or ramp waveform.3. Sine Waveform Frequency Output: The signal has 5 built in basic waveforms, sine waveform frequency output 1‑10KHz 0‑3.3V %, vertical sensitivity 10mV to 10V , horizontal time base range 1us‑10s, more waveform data can be obtained per unit time, thus making the waveform more accurate.4. TFT Screen: The oscilloscope is powered by a built in 10 mA battery, which will be fully charged in 1‑2 hours via a 5V 2A adapter and can operate for 4 hours (green indicator for completion/red indicator for charging). The digital pocket oscilloscope and transistor tester is designed with a high resolution 2.4 inch TFT screen with adjusting backlight. Better reading experience and easy to use.5. Multi Interface Screen Display: The oscilloscope can test different functions and support multi interface screen display. With keypad design, it is more convenient to operate and select different test function modes.6. Applicable It: The oscilloscope supports PC online operation, which is especially suitable for fast pairing of transistors, identification of mixed face mount and wordle components, and initial screening of small batch components. It can automatically identify and measure various transistors, including NPN and PNP transistors, diodes, double diodes, etc.

Specification:

Item Type: Digital OscilloscopeMaterial: ABS

Main s Of The Machine

Model

DSO TC3

Display

2.4 Inch TFT Color Screen, LED Backlight

Power Supply Voltage

1 x 8034 10mah Li Polymers Battery (Shipping With Built In Battery)

Charging Specification

USB Type C

Stand Specification

One Piece Foldable Stand

Digital Oscilloscope Mode sRealtime Sampling Rate10MSa/sAnalog Bandwidth0KhzInput Impedance1MOCoupling MethodAC or DCTest Voltage Range±400VVertical Sensitivity10mV-10VHorizontal Time Base Range1us-10sTrigger ModeAuto, Normal, SingleTrigger TypeRising Edge Or Falling EdgeWaveform FreezeYesAutomatic MeasurementYesComponent Test Mode sClaRangeDescriptionTriodeβ greater than 10 le than 600 hfe, base emitter voltage Ube, lc/le, collector emitter reverse cutoff current lceo, lces, protection diode forward voltage drop UfDiodeForward voltage drop