DSO-TC3 Digital Oscilloscope Transistor Tester Function Signal 3 in 1 Multifunction Electronic Component Tester

DSO-TC3 Product Manual:https://www.mediafire.com/file/3eddj8oght8m0q3/TC3_product_manual.pdf/file

This product ingeniously integrates digital oscilloscope, transistor tester and signal functions into one machine. With the real-time sampling rate of 10MS/s and bandwidth of 0Khz. Support maximum measurement of 400V voltage signal. With complete trigger function (automatic, single, regular). Equipped with an efficient button AUTO, the measured waveform can be displayed without cumbersome adjustments. Automatically identify and measure various transistors. Automatic of pin definitions. 6 kinds of signal waveforms . And with circuit continuity test function.Features:3 In 1 Function:This product ingeniously integrates digital oscilloscope, transistor tester and signal functions into one machine.Digital Oscilloscope Function:With the real-time sampling rate of 10MS/s and bandwidth of 0Khz. Support maximum measurement of 400V voltage signal. With complete trigger function (automatic, single, regular). Equipped with an efficient button AUTO, the measured waveform can be displayed without cumbersome adjustments.Transistor Tester Function:Automatically identify and measure various transistors, including NPN and PNP triode, N- and P- metal oxide-semiconductor field effect transistor, JFET, diodes, double diodes, thyristors,as well as resistors, inductors, capacitors, field-effect transistor, etc. paive component. Automatic of pin definitions.Signal Function:6 kinds of signal waveforms: sinewave, squarewave, wave, trianglewave, rampwave, direct current. 1-100KHz adjustable output frequency. 3.3V adjustable output voltage. 0-100% adjustable output duty ratio.Tool Box Function:Automatically analyze specific Protocol infrared code. Other function modes: including circuit continuity test, 0-40V input voltage measurement, PWM output, 0-32V diode measurement, temperature and humidity sensors measurement, etc.Compact Size:Lightweight and portable, also can be used as a portable tool for on-site debugging.Reliable Quty:Adopts ABS antidrop housing, antislip concave design, high elasticity keys, simple interface, easy operation.2.4inch Digital TFT Display:TFT color screen, high resolution display with LED backlight, with bright colors and high contrast, you can see the data clearly in bright light.High Accuracy:Infrared decoding design, quick response, accurate capture of highly sensitive response signal, fast and accurate measurement with small error.Rich and Powerful Features:One button for automatic adjustment, support for free switch, support intelligent fire preventions.Long Endurance:Built-in 10mAh high-capacity rechargeable polymer lithium battery, long lasting lifespan, Type-C interface, continuous power supplys without isolation , safer to use.Folding Bracket:Comes with invisible bracket, integrated folding, stable pment, free your hands, does not occupy too much space.Wide Applications:Suitable for mcu debugging, car repairing, home appliance repairing, DIY electronic competition, power-supply debugging, inverter, etc.Specifications:Name: 3in1 Digital OscilloscopeMaterial: ABSType: standard configuration, high configuration(optional)Display: 2.4 inches TFT color screenBattery: Built-in 10mah rechargeable lithium battery(included)Charging interface: USB Type-C, +5VDigital Oscilloscope: 10MSa/sReal-time sample rate: 0KhzAnalog Bandwidth: 1ΜΩInput resistance: Alternating Current/Direct CurrentCoupling method: 400VTest voltage ranges: 10mV-10VVertical Sensitivity (x1): 1us-10sHorizontal time base ranges:Trigger mode: Auto / Normal / SingleTrigger type: Rising edges / Falling edgesWaveform Freeze: YesAutomatic measurement: YesTransistor Tester:Capacitor: 25pF~100mFResistor: 0.01Ω ~ ΜΩInductor: 10uH~1000uHBattery: 0.1~4.5VInput voltage: 0~40VDS18B20: 0-85℃DHT1: 0-60°C/5-95%Signal :Sinewave: 1-10KHz/0-3.3V/%Squarewave: 1-100KHz/3.3V/%wave: 1-100KHz/3.3V/0-100%Trianglewave: 1-10KHz/0-3.3V/%Ramp: 1-10KHz/0-3.3V/0-100%Direct current: 0-3.3VItem size: 110 * 76 * 30mm / 4.33 * 2.99 * 1.18inPackage size: 140 * 125 * 55mm / 5.51 * 4.92 * 2.17inPackage weight:Standard configuration: 300g / 10.58ounceHigh configuration: 345g / 12.17ouncePacking List (Standard Configuration):1 * 3in1 Digital Oscilloscope3 * Test Hook1 * Probe1 * Type-C Cable1 * ManualORPacking List (High Configuration):1 * 3in1 Digital Oscilloscope1 * Adaptor1 * Probe1 * High Preure Probe3 * Test Hook1 * Type-C Cable1 * Manual

DSO-TC2 Product Manual:

https://www.mediafire.com/file/ppeajlhbdm1szo4/FNIRSI-1014D+Product+Manual.pdf/file

Introduction：

FNIRSI-TC2 ingeniously integrates digital oscilloscope, electronic component tester, PWM signal and other functions into one.Equipped with large-size color dot matrix TFT display.Built-in rechargeable lithium battery.Bring more practical functions to users with a small size,Also has good portability.

FNIRSI-TC2 has various working modes such as oscilloscope and component tester.Each time you click the power button, it will enter the mode selection interface.Pre the [Up] and [Down] keys of the direction keys to select,Select “Mos Test” item, pre【OK】key to enter component tester mode;Select the “Oscilloscope” item, pre【OK】key to enter the oscilloscope mode.

"Mos Test" mode can test various types of transistors, and can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance; can test capacitance, resistance, inductance components, etc.

FNIRSI-TC2 is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordle components, and preliminary screening of small batch components."Oscilloscope" mode to test the signal waveform of the circuit.Support online operation with computer, you can refresh the official firmware by yours and complete the upgrade.

It is hoped that FNIRSI-TC2 can make the study and work of the majority of users more efficient and interesting.This product ingeniously integrates digital oscilloscope, electronic component tester, PWM signal and other functions into one. Equipped with large-size color dot matrix TFT display. Built-in rechargeable lithium battery. Bring more practical functions to users with a small size. If you are interested in this product, come and have a try, it will not let you down.Features:2 In 1 Function:This product ingeniously integrates digital oscilloscope, electronic component tester, PWM signal and other functions into one.This product is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordle components, and preliminary screening of small batch components.The oscilloscope has a real-time sampling rate of 2.5MS/s and a 200kHz bandwidth.With complete trigger function (Single, Normal, Automatic), it can be used freely for both periodic analogs signals and aperiodic digital signals.Up to ±400V voltage signal can be measured, has a wide applications.Equipped with efficient one-key AUTO, the measured waveform can be displayed without cumbersome adjustment.S-contained 80kHz /5.0V PWM waves test signal source with adjustable duty cycle.This instrument can automatically identify and measure various transistors. Including NPN  transistors, N- and P- field effect transistors, junction field effect transistors, diodes, double diodes, thyristors, etc.,and paive component such as resistors, inductors, capacitors, etcAutomatic of pin definitions.Specifications:Material: ABSType: without adapter, with adapter(optional)Display: 2.4inch color screen with backlightBattery: 1 * lithium battery, 10mAh(included)Recharging: USB Type-C, 5VPackage size: 140 * 125 * 55mm / 5.5 * 4.9 * 2.2inPackage weight:Without adapter: 296.6g / 10.5ounceWith adapter: 345.6g / 12.2ounceOscilloscope Specifications:Real-tim sample rate: 2.5MS/sAnolog bandwidth: 0-200kHzInput resistance: 1MΩCoupling: AC/Direct currentTest voltage ranges:1:1 probe: 80Vpp (±40V)10:1 probe: 800Vpp (±400V)Vertical sensitivity: 10mV/Div~10V/Div(in 1-2-5 increments)Vertical dispment: adjustable, with indicationHorizontal time base ranges: 10us/Div~0s/Div (in 1-2-5 increments)Trigger mode: automatic, regular, singleTigger type: rising edge. falling edgeTrigger level: adjustable, with indicationWaveform freeze: yes (HOLD function)Automatic measurement: maximum, minimum, average, rms, peak-to-peak, frequency, period, duty cyclePWM output: FRQ: 0~80KHz, duty cycle: 0~100%, amplitude: 5.0VElectronic Component Tester Specifications:Capacitance measuring ranges: 25pF~100mF(capacitance value, lo factor Vlo)Resistance measuring ranges: 0.01Ω~MΩInductance measuring ranges: 10uH~1000uHBattery measuring ranges: 0.1~4.5VInput voltage: 0~16VPWM output: 1.5KHz~9.99MHzWithout Adapter Packing list:1 * Tester1 * Type-C Cable3 * Test Hook1 * ProbeWith Adapter Packing list:1 * Tester1 * P6100 High Voltage Probe1 * Type-C Cable3 * Test Hook1 * Probe