DPOX180H Digital Oscilloscope Dual 2 In1 Function Signal 180MHz -3DB Fluorescence Display 20Mhz ZOOM

DPOX180H is a cost-effective dual- digital phosphor oscilloscope launched by FNIRSI with a two-in-one oscilloscope and signal . The oscilloscope has a real-time sampling rate of 0MSPS and an analog bandwidth of 180MHz. In terms of display, a high-contrast 2.8-inch IPS full-vision LCD screen and digital fluorescent technology are used. The waveform display effect is good, and the color ways are grayscale and color temperature. With a waveform refresh rate of up to 000wfm/s, it is easier to display abnormal signals with low probability. The time base system includes a ZOOM time base for easy analysis of digital protocol signals. With a vertical sensitivity as low as 5mV, it can better measure small signals of 5mVPP. Ultra-high signal-to-noise ratio, fully sealed shielding measures, stable circuit feedback design, clean and clear waveform. The adjustable automatic bandwidth limit and adaptive adjustable trigger suppreion are suitable for analyzing and measuring signals with relatively large noise. 20M hardware bandwidth limit, can filter out noise above 20MHz. The trigger adopts digital trigger technology with high precision. It has three trigger modes: automatic/single/normal. It has a strong ability to capture periodic signals, burst signals and protocol signals. The DDS signal has 14 kinds of function signal waveforms and a free-customized chopping waveform. The frequency of the sine wave can reach up to 20MHz, and the other waveforms can reach up to 10MHz. The chopping output function can store up to 0 customized signals. It has three time base modes of YT, XY and rolling. Manual cursor measurement is suitable for measurements with large noise signals. Efficient one-button automatic adjustment, adaptive 25%, %, 75% electric level trigger, it only takes 2 seconds to measure 1VPP/1KHz. Save waveforms and screenshots with one key, up to 2 sets of waveform data or 90 pictures can be stored, and 0 intercepted wave data can be stored at the same time. The data browser can browse and view the currently saved waveform data and pictures, and the waveform data supports operations such as zooming and moving. High voltage anti-ing protection, all gears can withstand high voltage up to 400V. USB data export, you can connect to a computer to copy picture files, and you can also copy system files to the oscilloscope for system upgrades. 5V2A fast charging, and 1 hour can charge to 80%.

Packing list:

1 * DPOX180H Digital Phosphor Oscilloscope

2 * Matching 200MHz Probe (1X & 10X)

1 * 5V2A Power Adapter

1 * USB Data Line

1 * User Manual

Specification:

Style: Standard configuration / High configuration (optional)

Display Specifications: 2.4-inch TFT color screen, LED backlight

Power supply: built-in 10mAh rechargeable lithium battery

Charging Specifications: USB Type-C / 5V

Size: approx. 103*79*31mm

Feature:

2.4" HD color screen

Two-in-one oscilloscope: oscilloscope + transistor tester

Transistor Test

PWM square wave output

Polymer lithium battery, 240 minutes of continuous power supply.

Fine workmanship and good performance.

Easy to use.

Long service life.

Oscilloscope function introduction:

Real-time sampling rate 2.5 MS/s, bandwidth 200kHz

With full trigger function (single, normal, automatic)

Can measure voltage signals up to ±400V

Equipped with efficient one-button AUTO, the measured waveform can be displayed with simple adjustment

S-contained 80kHz/5.0V PWM wave test signal source with adjustable duty cycle

Transistor detector introduction:

Automatically identify and measure various transistors, including NPN and PNP transistors, N- and P- FETs, junction FETs, diodes, dual diodes, thyristors, etc., as well as paive components such as resistors, inductors, and capacitors

Automatic of pin definitions

Automatically parse the infrared code of NEC protocol

Other functional modes: including circuit continuity test, 0~16V input voltage measurement, PWM output, 0~24V Zener diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement, etc.

Package Included:

Standard configuration:

1pc x DSO-TC2 Tester

1pc x Type-C charging cable

3pcs x test hook

1pc x normal probe

High configuration:

1pc x DSO-TC2 Tester

1pc x adapter

1pc x P6100 High Voltage Probe

1pc x Type-C charging cable

3pcs x test hook

1pc x normal probe

Features:

【Compact Size】: Lightweight and portable, space-saving design makes it can be carried out to work. It is a utility maintenance and DIY tools for on-site debugging.

【Fine Workmanship】: High-sensitivity buttons are easy to use, Type-C port supports firmware upgrade and charging, folding bracket for convenient pment, gear toggle buttons to switch settings as needed.

【2.8inch Digital Display】: Equipped with 320*240 resolution color display, with bright colors and high contrast, you can see the data clearly.

【Efficient and Accurate】: Multiple s measurement, the oscilloscope has a real-time sampling rate of 2.5MS/s, 200kHz bandwidth, with complete trigger functions (single, normal, automatic), both for periodic analog signals or non-periodic digital signals can be freely used, support switch between rising-edge trigger mode and falling-edge trigger mode, support up to ± 400V voltage signal measurement.

【1KHz Cbration Squarewave】: Supplied with a 1KHz cbration squarewave, easy and convenient probe cbration.

【One-button Automatic Adjustment】: Equipped with efficient one-button AUTO that displays the measured waveform without tedious adjustment. With waveform measurement display, a variety of waveform measurements to meet your daily needs.

【Wide Applications】: Intelligent anti-ing, applicable to a variety of occasions, suitable for utility measurements, DIY learning, automobile repairing, home appliance repairing, research and teaching, outdoor maintenance, etc.

Specifications:

Name: Digital Oscilloscope

Material: plastic

Type: standard configuration, high configuration (optional)

Battery: 1 * rechargeable 1000mAh lithium battery (included)

USB charging: 5V/1A

Display: 2.8inch/PPI:320*240

Bandwidth: 200KHz

Realtime sampling rate: 2.5MS/

Vertical sensitivity: 10mV/Div-20V/Div (in 1-2-5 increments)

Time base ranges: 10μs/Div-s/Div (in 1-2-5 increments)

Cbration squarewave frequency: 1K

Duty cycle: %

Voltage ranges: X1:±40V (Vpp:80V); X10: ±400V (Vpp:800V)

Trigger mode: automatic/regular/single

Item size: 99 * 68 * 20mm / 3.90 * 2.68 * 0.79in

Item weight: 100g / 3.53ounce

Package size:

Standard configuration: 125 * 85 * 40mm / 4.92 * 3.35 * 1.57in

High configuration: 210 * 1 * mm / 8.27 * 5.91 * 1.97in

Package weight:

Standard configuration: 168g / 5.93ounce

High configuration: 243g / 8.57ounce

Packing List (Standard Configuration):

1 * Digital Oscilloscope

1 * Type-C Cable

1 * General Probe

1 * User Manual

OR

Packing List (High Configuration):

1 * Digital Oscilloscope

1 * Type-C Cable