DPOX180H Digital Oscilloscope 180MHz -3DB 000wfms/s Dual 20Mhz Signal ZOOM FFT Osciloscópio

DPOX180H is a cost-effective dual- digital phosphor oscilloscope launched by FNIRSI with a two-in-one oscilloscope and signal . The oscilloscope has a real-time sampling rate of 0MSPS and an analog bandwidth of 180MHz. In terms of display, a high-contrast 2.8-inch IPS full-vision LCD screen and digital fluorescent technology are used. The waveform display effect is good, and the color ways are grayscale and color temperature. With a waveform refresh rate of up to 000wfm/s, it is easier to display abnormal signals with low probability. The time base system includes a ZOOM time base for easy analysis of digital protocol signals. With a vertical sensitivity as low as 5mV, it can better measure small signals of 5mVPP. Ultra-high signal-to-noise ratio, fully sealed shielding measures, stable circuit feedback design, clean and clear waveform. The adjustable automatic bandwidth limit and adaptive adjustable trigger suppreion are suitable for analyzing and measuring signals with relatively large noise. 20M hardware bandwidth limit, can filter out noise above 20MHz. The trigger adopts digital trigger technology with high precision. It has three trigger modes: automatic/single/normal. It has a strong ability to capture periodic signals, burst signals and protocol signals. The DDS signal has 14 kinds of function signal waveforms and a free-customized chopping waveform. The frequency of the sine wave can reach up to 20MHz, and the other waveforms can reach up to 10MHz. The chopping output function can store up to 0 customized signals. It has three time base modes of YT, XY and rolling. Manual cursor measurement is suitable for measurements with large noise signals. Efficient one-button automatic adjustment, adaptive 25%, %, 75% electric level trigger, it only takes 2 seconds to measure 1VPP/1KHz. Save waveforms and screenshots with one key, up to 2 sets of waveform data or 90 pictures can be stored, and 0 intercepted wave data can be stored at the same time. The data browser can browse and view the currently saved waveform data and pictures, and the waveform data supports operations such as zooming and moving. High voltage anti-ing protection, all gears can withstand high voltage up to 400V. USB data export, you can connect to a computer to copy picture files, and you can also copy system files to the oscilloscope for system upgrades. 5V2A fast charging, and 1 hour can charge to 80%.

Features:【2in1 Design with Reliable Quty】: 2in1 dual digital fluorescence oscilloscope signal . As an oscilloscope, it has 180MHz-3DB analog bandwidth and 0MSPS real-time sampling rate. Built-in 20MHz DDS function signal with 14 kinds of standard function signals, output amplitude fixed at 1VPP, sinewave frequency up to 20MHz, other waveform frequency up to 10MHz.【Digital Fluorescence Display Technology】:2.8-inch IPS display with clear definition, color temperature display and multi-level grayscale display capability; waveform changes can be clearly seen in one minute.【000wfms/s Waveform Refresh Rate】:Better capture the signal so that there is nowhere for abnormal waveforms to hide.【Accurate Real-time Trigger System】:With complete trigger function, automatic, single, regular three trigger modes; rising-edge trigger mode, falling-edge trigger mode.【Adaptive Adjustable Trigger Suppreion】:Adapts high-frequency, low-frequency, and high-noise signals for clean, stable waveforms.【Large Time Base Scrolling Mode】:In scroll mode, slow level changes can be monitored in real time.【ZOOM Scng Time Base】:Provide an additional amplification time base. It can provide 2~1000 times amplification view effect in running or pause state.【Digital Fluorescence XY Mode】:Support digital fluorescence technology, dual- generate a closed curve graph can be used to compare the amplitude, frequency, phase of two groups of signals.【5mV High Sensitivity Ultra-high Waveform Signal-to-Noise Ratio】:The analog front-end uses outstanding shielding measures and a stable feedback system; all parts with sources of interference are located away from the analog front-end.【20M Hardware Bandwidth Limit】:The analog front end has a built-in switchable 20MHz hardware bandwidth limiting component, and the -3DB attenuation bandwidth is 20MHz when turned on.【Special Truncated Output Function】:Intercept part or all of various signals measured by oscilloscope to be used as output signal of signal , up to 0 custom signals can be stored.【400V High-voltage -in Protections】:The analog front-end input stage is designed with high-voltage resistance, and the overall design can achieve 400V -in resistance in any gear.【Built-in Rechargeable Lithium Battery】:Built-in 3000mah high-capacity rechargeable lithium battery, up to 4 hours of life, can be set from 5 minutes to 2 hours of timeout time, support 5V2A quick charging.【One-Button Auto Adjustment】:Manual cursor measurement, equipped with efficient one-key auto adjustment function, signal measurement is easy and fast; cursor accurate measurement of waveform s.【FFT Simple Spectrum Display】:Qutative overview of the current signal spectrum components.【Waveform Saving Screenshot Saving】:Built-in 120Mbit storage space, up to 2 sets of waveforms and 90 screenshots can be stored, you can view full-screen imagings and secondary analysis of the stored waveform data.【Firmware Upgrade & Imaging Export】:Connect to computers via USB cable, copy the system imaging file iso to U disk for upgrade, also you can directly view or copy the saved BMP imaging file inside the oscilloscope.Specifications:Name: 2in1 Oscilloscope Signal Material: plasticsLanguage: English, Ruian, Portuguese(optional)Battery: 1 * built-in 3000mAh battery (icluded)Number of s: 2Analog bandwidth: 180MHzMaximum sampling rate: 0MSPSInput coupling: DC/ACRise time: 1.8nSStorage depth: 120KptsInput impedance: 1MQ-18PFVertical sensitivity: 5mV~10V(1X)Time base range: 5nS~SDCAccuracy: ±2%Time accuracy: +0.01%Trigger architecture: digital triggerTrigger mode: auto/single/regularTrigger edge: rising edge/falling edgeTest range: 40mV~80V(1X)Screen storage: 90 sheetsInterceptwave signal: 0Interceptwave outputter: Support20M hardware bandwidth limit: supportCursor measurement: frequency/period/amplitudeZOOM scng time base: supportDigital fluorescence technology: SupportAdjustable Automatic Bandwidth Limiting: SupportColor temperature display technology: SupportScrolling mode: supportX-Y mode: SupportAuto-adjustment: SupportWaveform manager: supportHigh voltage anti-ing: all gears withstand voltage 400VScreen size: 2.8 inchScreen resolution: 320 * 240Screen display proce: IPS full viewExpansion interface: USB transmiion interfaceAuto shutdown: 5 minutes ~ 2 hoursFirmware upgrade: support iso imaging upgradeCharging requirements: 5V-2ABattery capacity: 3000mahStandby time: 3~4 hours on full charge measurement: 12 kindsSignal : 14 kinds of standard function signalWaveform storage: 2 groupsItem size: 135 * 90 * 40mm / 5.31 * 3.54 * 1.57inPackage size: 245 * 147 * 80mm / 9.65 * 5.79 * 3.15inPackage weight: 680g / 1.lb

Packing list:

1 * DPOX180H Digital Phosphor Oscilloscope

2 * Matching 200MHz Probe (1X & 10X)

1 * 5V2A Power Adapter

1 * USB Data Line

1 * User Manual