Digital Transistor SMD Components Testers ESR02 PRO Diode Triode Capacitance Inductance Multimeter ESR Meter,Default NO5236

Descriptions:

This meter is a small tool for the engineer, electronic maintenance and factory. It is very easy to test plug-in and SMD devices, it can also test different kinds of diodes, triodes, thyristors, MOSFET, enable to analysis the device type, the polarity of the pin, the output HFE, the valve voltage, the junction capacitance of the FET.

Notes:

1.Before testing the capacitor, be sure to discharge it, otherwise it may damage the internal circuit

2.If using DC power supply, please choose DC 9V - 12V adapter (including 9V and 12V)

3.It is powered by 1pcs of 9V 6LR61 battery, when the battery power is under 6V, please replace it with a new one.

4.The battery is not included in the package due to aviation safety checks. Sorry for any inconveniences caused.

Parameters:

Model: ESR02PRO

Resistor: 0 - 50Mohm (Resolution: 0.01 ohm)

Capacitor: 25pF - 100mF (Resolution: 1pF)

Inductor: 0.01mH - 20H (Resolution: 0.01mH)

Capacitor ESR: 2uF-50mF (Resolution: 0.01 ohm)

Size: 14 * 8 * 5cm

Working temperature: 0-40 degC

Screen type: digital display

ESR parameter table: Yes

Left and right hand operation mode: Yes

Component groove: Yes

SMD Component Tester: Yes

Capacitor discharge device: Yes

Test line interface: Yes

Esr continuous measurement function: yes

Using Guide:

1.Push \"POWER / TEST\" to power on and start a test, multiple measurements can be repeated by this key, auto power off 20 seconds after measurement

2.Provide three kinds of socket, each socket pin 1, pin 2 and pin 3 are connected.

3.There is a table \"typical ESR value of electrolytic capacitor\" at the back, it is for guiding only, these are typical value for standard grade electrolytic capacitor at room temperature.

Calibration:

Short the test pin 1, 2, 3 together and push \"POWER / TEST\" button, then the screen prompts to enter calibration, push the button again within 2 seconds to confirm.

Few seconds latter the screen prompts to release pin 1, 2, 3, release them and wait for calibration finish.

We confidently assure you'll be satisfied with what you get.However, If  there's a chance that you are not satisfied with our goods or something else, please let us know before leaving us a Negative feedback. We will try our best for 100% customer satisfaction. Your 5-Star Positive Feedback is much appreciated to us, and your satisfaction is our greatest motivation to move forward.Welcome to Shop Here! Want more Items? Please come & visit our SHOP.

*Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 5 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer).Your satisfaction is our first priority.

*If you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.