Digital power supply case S400/S12D and 400W switch power supply for RD6006/RD6006P voltage converter (no RD6006 included)

16363955656717

Technical Support If you have any questions about our products, welcome to contact us in these ways,for now we support Tencent QQ group, WeChat group and WhatsApp, here is the contact information. QQ Group:550112838 WeChat:15868147353 WhatsApp:+8615868147353

Note before buying:

1, those 2 choice S400 case and S12D caseare only case, not containing any power supply. some picture show installation finished by RD6006 , switch power and case .S12D case is suitable for RD6006/RD6006W/RD6012/RD6012W case

2, there are 2 choice,S400 case and S12D case. For S400 case, you can put AC switch power and RD6006 into this case. for S12D, you only put RD6006.

RD6006 and S400 case aemble instruction: https://drive.google.com/drive/folders/1amKj1B2c2w3NYEQjY7_17ouiZIPQoOwp?usp=sharing

RD6006 and S12D case aemble instruction: https://drive.google.com/drive/folders/155ySRz6Ksvr1JBHdXWVc4mM6cCtqHVoI?usp=sharing

Installation video: https://www.youtube.com/watch?v=RMRuErdv2LM

the option 3 is the 400W switch power supply used for RD6006/RD6006W and Case S400

3, for S400 case, it is just case, not conntaining any power supply, but it is suitable for RD6006/RD6006W and AC 400W 65V switch power supply, you can buy them seperately to aemble easy.

4,for input AC switch power supply, we recommend 400W 65V switch power supply (S400 case leave fix hole size for this version)

Note: Please use the power supply we recommend or some qualified brand power suuply to power on RD6006, Poor quality power supplies may occasionally provide over-voltage when turned on, and the resulting damage must be borne by the customer.

there may be scratches on the surface but it doesn't affect the product performance, please do not be over picky, and if you do mind this, please do not buy this product

5, for S400 case, durning the shipping, maybe the case side wiil be a little deformation (just like picture ), you can use your hand to ajust, that's ok, if you are mind this , please stop buying.

6.install the device in the right way

2.Product Dimension

3.Acceory List

NAME

SPECIFICATION

QUANTITY

PICTURE

Upper Board

S400 upper board

1

Lower Board

S400 lower board

1

Fan

50mm*15mm

1

Fan power board

33mm*33mm

1

Screws for

fan power board

M3*5*7

3

Foot pad fixing screws

M3*5*7

4

Screws forfanfixing

Round screw

M3*16

4

Nuts for fan fixing

M3 nut

4

Cables

Brown(9cm)：2 yellow-green(9cm)：1

blue(10cm)：1

red(40cm)：1

black(40cm)：1

Temperature sensor connection

cable with board:1

7

Rocker switch

KCD3

1

AC power socket

AC-04

1

Non-slmat

Φ13*4

4

switch power supply fixing screws

M4*6mushroomhead

4

Case fixing screws

M3*6 flat head white

10

4.Acceory Picture

A:Lower Board

B:Upper Board

C:CaseandAC power socketfixing screws

D:Screws forfan power boardand Mats

E:Non-slmat

F:Switch power supply fixing screws

G:Nuts for fan fixing

H:Screws forfanfixing

I:Fan power board

J:Rocker switch

K:AC power socket

L:Fan

M:Cables

5.AemblyProcedure 5.1 Aembly Preparation

● RD6006/RD6006W/RD6006Pdigital power supply*1, S400case*1,400W65Vswitch power supply*1, DC regulated power supply*1

● Tools, acceory (3 pin plug cable, multimeter, screw driver, test pencil...)

● Proper aembly environment

It is recommend to use a 400W 65V switch power supply as shown below.

5.2 Aembly step

Note:The case material is a bit soft and may be slightly deformed during transportation. If there is a gap during the aembly, please straighten it before aemble it.

①Check the acceories: check if the acceories of S400 are same as acceory list or acceory picture.

②Check RD6006: connect the power cables to the input terminal of RD6006, and then adjust input power supply to 12v/1A to power on RD6006, and set 5V/1A output on RD6006, turn on the output to see if the output is normal.

③Back board aembly: install the rocker switch,AC power socket and fan on the lower board.

④Connect the cables to Switch power supply: connect the brown cable to the (L) terminal, connect blue cable to the (N) terminal, connect yellow-green cable to the (〨) terminal, connect the black cable of the fan board and the output black cable to the (-V) terminals, connect the red cable of the fan board and the output red cable to the (+V) terminals.As shown below.Connect the output

⑤Install the switch power supply

Install the switch power supply on the lower board

⑥Install the board and connect the power cable (dangerous,non-profeionals should not operate)

Install the board of temperature sensor extension cable and fan board on the back panel, use brown cable to connect therockerswitch and the live wire (L) of the switch power supply;then use the brown cable to connect therockerswitch and the live wire (L) of the AC power socket;Use the blue cable to connect the neutral wire (N) ofAC power socket and the neutral wire (N) of switch power supply;Use a yellow-green two-colorcableto connect the ground wire (E) ofAC power socket and the ground wire (〨) of switch power supply.Insert the cable of the fan to the fan board as shown below.

⑦Switch power supply test:

Check the wring again and power on the switch power supply, and use test pencil to check the power and insulation status. Then use multimeter to check if the 65V output is normal, then use screw driver to adjust the output of the switch power supply to 68V.

⑧Install RD6006, install the CR1220 battery (prepare yourself) and wifi board (if you order the wifi version), then insert the RD6006 in the right way

⑨Connect the rest cables: connect thegreenterminalto the input of RD6006 and insert the temperature sensor extension cable to the socket on the back of RD6006.

⑩Power on and test

Connect power cable and turn on the switch, the fan start to work.

(Note: Temperature-controlled fan, when the RD6006 is powered on below 40℃, it will work for 3 seconds and then stop, and it will run at low speed below 40℃-50℃,  run at medium speed below 50℃-60℃,  run at full speed when the temperature exceeds 60℃)

⑪Install the screws of the case

⑫Install the foot pads.

⑬If you want to use the temperature sensor, you just need to insert the cable on the back panel as shown below:

S12D Case Instruction: Digital power supply case (S12D) aembly instruction

This case is suitable for RD6006/RD6006W/RD6012/RD6012W

Date:2019.10.18

Dear users, thank you for purchasing the digital power supply acceory-metal case produced by Hangzhou Ruideng Technology Co., Ltd. In order to let you know more about the full function of this product, get a better experience and avoid misuse. Please read this instruction carefully before aembly. Keep it for future reference.

1.Notes

● Read this instruction carefully before aembly, if you still have question, please contact us.

Since the aembly proce involves voltage that exceeds the human body's safety, non-profeionals should not operate, do insulation and protective measures during the aembly proce, check the wiring several times for safety, and place the product at a place which children and old people can not get.

● This case is made of cold-rolled steel plate and the surface is sprayed. When aembling and using, prevent it from scratching by sharp objects, and avoid direct sunlight and humid environment.

● Avoid short circuit when aembling, connect the electrode correctly.

● NEVER connect the cables with the power ON.

● Try to avoid vibration and fall.

2.Product Dimension

3.Acceory List

NAME

SPECIFICATION

QUANTITY

PICTURE

Upper Board

S12D

1

Lower BoardS12D

S12D

1

Cables

RED：2

BLACK：1

3

Female Banana Socket

M4*36

2

Rocker switch

KCD3

1

Non-slmat

Φ13*4

4

Mat fixing screws

M3*5*7

4

case fixing screws

M3*6

flat  head  white

8

4.AcceoryPicture

A: Upper Board

B:Lower Board

C: Non-slMats

D: Screws for Non-slMats

E: Case Fixing Screws

F: Cables

G: Rocker Switch

H: Female Banana Socket

5.AemblyProcedure 5.1 Aembly Preparation

● RD6006 digital power supply*1, S12D case*1

● Tools, acceory(DC power supply,screw driver)

● Proper aembly environment

Note:The case material is a bit soft and may be slightly deformed during transportation. If there is a gap during the aembly, please straighten it before aemble it.

5.2 AemblyStep

1. Check the acceories:

Check if the acceories of S12D are same as acceory list or acceory picture.

2. Install the female banana sockets and switch:

Please put the female banana sockets and rocker switch on the corresponding position of back board, the red female banana socket is positive electrode and the black female banana socket is negative electrode. Screw the fixing screws.

3. Connect cables

Use cables to connect switch and female banana sockets, and tighten with nuts, the wiring is completed, you can see the final connection below:

4. Install RD6006: install RD6006 on the front side and connect the external sensor.

5. Use 12V/1A DC power supply to power on RD6006, check if the connection succeeds(check the wring before power on)

6. Install the upper board: install the upper board on lower board, and use screws to fix it.

7. There are four Non-slip mats, please use screws to fix them.

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.