Digital Pinless Non-invasive Inductive Moisture Meter Tricolor Bar Graph Indicator Lumber Timber Board Wet Dry Tester Drywall

Digital Pinle Non-invasive Inductive Moisture Meter Tricolor Bar Graph Indicator Lumber Timber Board Wet Dry Tester Drywall

Ideal for measuring moisture content without damaging the material that is being tested. It emits and picks up electromagnetic signals through the material to be tested. It measures target object with at least 20mm depth (If not, simply stack a few same objects together to reach the minimum depth). The reading displayed is an average value of the moisture content from the entire surface area and the maximum depth of penetration. It calibrates automatically, therefore manual calibration is no longer neceary.

Ideal for wood & timber industry, craftsmen, building material storage, ceiling leakage detection, woodworkers, contractors, building inspectors, etc.

Intelligent non-invasive & non-marring design measures moisture without damaging the surface

Detect Moisture of 4 different types of materials (drywall, masonry, softwood, hardwood)

Audio Alarm if reading is out of range

Moisture display on LCD and LED bars indicator

Tricolor LED bar graph indicator lights to indicate dry, normal and wet moisture level.

Auto calibration

Data hold function: Lock readings

Green backlight

Low battery indicator

Auto power off

Type : Non-Invasive Inductive Moisture Meter

Measurement Range : 0%~53% ( Softwood ) ; 0%~35% ( Hardwood )

Moisture readings of drywall and masonry are relative values

Measurement Precision : ±4% (Softwood, Hardwood)

Maximum Measuring Depth : 3/4 inch (20mm)

LED Moisture Content Indicator: Drywall & Masonry

Green: 0~30%; Yellow: 31~70%; Red: 70%+

Softwood & Hardwood

Green: 5~14%; Yellow: 15~17%; Red: 17%+

Alarm Range:

Drywall & Masonry: >70%

Softwood & Hardwood: >17%

Auto power off : 2 minutes inactive

Working Temperature : 0~40°C

Storage Temperature : -10~50°C ; Humidity : 5~95% RH

Operation Current: