Digital 2.8inch TFT Display Oscilloscope Handheld Oscope

With a bandwidth of 10MHz, a real-time sampling rate at 48MSa/s, and a deep storage capacity of 128Kbytes, the oscilloscope delivers precise measurements of various signals. It can simultaneously measure various electrical parameters or capture waveforms and display the electrical parameters or waveforms. Multifunctional design, with time base adjustable, amplitude adjustable, data storage, and auto-sleep functions. It can easily handle measurement in various fields of testing and debugging electronic circuits, troubleshooting and repairing electronics, communications, computers, etc.

Features:

【Digital Display】: With a bandwidth of 10MHz, real-time sampling at 48MSa/s, and a deep storage capacity of 128Kbytes, the oscilloscope delivers precise measurements of various signals. Its 2.8-inch TFT color display ensures clarity in both waveform visualization and numerical readings. It supports adjusting the backlight off time (30S, 60S, 120S, Off) and screen backlight brightness (30%, 50%, 80%, 100%).

【3 Trigger Modes & Auto Capture】: This device features three triggering modes: AUTO, NORMAL, and SINGLE, ensuring precise control over waveform acquisition. The auto-capture function simplifies operation by automatically capturing waveforms, suitable for quick analysis and troubleshooting. It supports Alternating Current/Direct Current coupling, X1/X10 probe attenuation adjustment, and the switch between risingedge trigger mode and fallingedge trigger mode for versatile analysis.

【Enhanced User Experience】: It allows for the adjustment of voltage amplitude and timebase settings, waveform position, and cursor placement via a responsive dial. Automatic mode intelligently setup parameters for optimized signal display. The silent mode and auto-sleep function add to user comfort and efficiency, while the compact size and lightweight design make it highly portable.

【Versatile Connectivity and Data Management】: Equipped with Type-C connectivity, users can save, view, and analyze the screenshots of waveforms. The oscilloscope also offers options to manage stored data, including picture retrieval, deletion, and formatting, and supports U-disk storage for data backup.

【Comprehensive Safety & Wide Applications】: This instrument provides a comprehensive diagnostic toolset for automotive, electronics, and industrial applications. It can easily handle measurement in various fields of testing and debugging electronic circuits, troubleshooting and repairing electronics, communications, computers, research and teaching, etc.

Specifications:

Name: Oscilloscope

Material: ABS

Type: standard configuration, high configuration (optional)

Battery: 1 * built-in 1800mAh battery (included)

Display: 2.8-inch TFT display

Bandwidth: 10MHz

Sampling mode: real-time sampling

Real-time sampling rate: 48MSa/s

Number of channels: 1, single channel

Sampling rate: 3 times / sec

Input impedance: 1ΜΩ,@16pF

Probe attenuation: X1, X10

Maximum input voltage: X1 ±40V, X10 ±400V

Sampling rate: 1.5Sa/s-48MSa/s

Waveform interpolation: (sinx)x

Sweeping rate: 10ns/Div-20s/Div

Time base accuracy: 20ppm

Storage depth: 128Kbyte

Vertical sensitivity: X1 20mV/Div-10V/Div; X10 200mV/Div-100 V/Div

Displacement ranges: 4 frames (positive and negative)

Low frequency response: greater than 10 HZ

Rise time: less than 100ns

DCGain accuracy: ±3%

Trigger mode: automatic, normal, single trigger

Trigger edges: rising, falling

Working environment: 0-40℃,