Deelife OBD2 Hardwire Kit for Car DVR Mirror Camera Dash Cam Parking Guard Cable 12V 24V to 5V Mini Micro USB Hard Wire

OBD2 Power Cable for Car DVR Hard wire kit for Dash cam Powered by deelife

Features

• OBD2 port to get the power supply - Just need to plug into OBD2 port, easy to install - No need to open the car fuse box to install • Support DVR 24-hours parking Monitoring - Provide 24-hours continuously power supply for the car DVR via 16pin OBD2 port connection • P / I / II mode switch ( D2A-S model can not Support ) - Can choose the most suitable power supply mode for your device • Support DVR Time-lapse video recording - Provides the power supply for recording videos at 1 frame per second in parking guard mode • Battery low voltage protection - Automatically cut off the power supply when battery voltage is lower than 11.6V(12V Cars) or 23.6V(24V Cars) • With an additional USB cable ( Mini USB Female to micro USB male ) - Suitable for Mini USB device or Micro USB device Product Parameters • Product Name: OBD2 Power Cable • Product Model: D2A-S / D3A-S • Input Voltage: DC 12V / 24V ( D2A-S only support 12V ) • Output Voltage: 5V • Power Supply Interface: 16pin OBD port • USB Output : Mini USB / Micro USB • Cable Length: about 3 meters • Working Temperature: -40~95 ℃ Attention ( Before buying ) • Please check does your DVR device supports the "Time-Lapse Video Recording" Function, --If the DVR device does not support the Time-Lapse Video Recording Function, Our D3A-S just supports the Auto power on function and 24 hours 5V output function. --If the DVR device supports the Time-Lapse Video Recording Function, D3A-S will work properly with the DVR device when switching to the D3A-S I or II position. • I/II mode need your car DVR device supports the "Time-Lapse Video Recording" Function, if not support, I/II mode will be the same with P mode. • Can not support the brand "70mai" "xiaomi" "mijia" dash cam.

How to judge the Car DVR support time-lapse ? The 4th Pin of the Car DVR should be the ACC detection pin.( As the picture)

Warning

Can only support cars manufactured from 2007, because the old cars are not standard OBD2 protocol.

For Ruian local car brands like LADA, UAZ, GAZ, etc, Support only from 2012. Support OBD 2 protocols car : ( Must be OBD2 protocols car ) 1. SAE J1850 PWM(41.6Kbaud) 2. SAE J1850 VPW(10.4Kbaud) 3. ISO9141-2(5 baud init,10.4Kbaud) 4. ISO14230-4 KWP(5 baud init,10.4 Kbaud) 5. ISO14230-4 KWP(fast init,10.4 Kbaud) 6. ISO15765-4 CAN(11bit ID,500 Kbaud) 7. ISO15765-4 CAN(29bit ID,500 Kbaud) 8. ISO15765-4 CAN(11bit ID,250 Kbaud) 9. ISO15765-4 CAN(29bit ID,250 Kbaud) If you are not sure about the compatibility, please feel free to contact us , we will reply within 12 hours.

FAQ

My DVR does not support the time-lapse recording function, how to use the D3A-S product? 1) If your DVR does not have the time-lapse recording function, but you want the DVR to record 24 hours a day, no matter which mode you choose, the hardwire kit will provide 24 hours 5V DC output. 2) If your DVR does not have the time-lapse recording function and you do not want the DVR to record 24 hours a day, please unplug the OBD plug after the car is turned off. My DVR supports the time-lapse recording function, how to use the D3A-S product? 1) If your DVR has a time-lapse recording function and you want 24 hours parking monitoring, it is recommended that you use the "I" or "II" mode and turn on the DVR time-lapse recording function. When the ACC/Engine is turned off, The DVR will enter time-lapse recording mode within 1-5 min. 2) If your DVR has a time-lapse recording function, but you do not want the DVR to record 24 hours a day, it is recommended that you use the "I" or "II" mode, turn off the time-lapse recording function of the DVR, the DVR will power off automatically when the ACC/Engine is from ON to OFF ( park the car), no need Unplug the OBD plug.

Ts

For D3A-S 1. Before installation, please make sure that the car is in the state of Engine OFF and ACC OFF, not recommended to install it with power on.

Product & Acceories

• OBD2 Power Cable

• USB Cable ( Mini USB Female to micro USB male )

• OBD2 3-ports expansion adapter (Optional)

• Cable Cl x 2

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.