DC3.330V Working Voltage 1Hz150KHz Frequency High PWM

This high- PWM driver is a MOS switch type output. When the load is not connected, there is no waveform, and the waveform appears only after the load is connected. load is connected. Suitable for direct drive motor, solenoid valves, LED and other loads, the current is less than 8A. Two modes design, frequency (continuous) and duty cycle adjustable under PWM mode, and Positive pulse width time, negative pulse width time, -on delay starts time, and number of pulses are adjustable under pulse mode.

Features:

This high- PWM driver is a MOS switch type output. When the load is not connected, there is no waveform, and the waveform appears only after the load is connected.

Suitable for direct drive motor, solenoid valves, LED and other loads, the current is less than 8A.

It can also be used in series with resistors to achieve high current PWM output with reverse waveform and current less than 100mA.

Support LED brightness adjustment, motor speed adjustment, frequency, duty cycle can be adjusted.

Drive the solenoid valves to pull and release, automatic cycle, delay output, cycle number (or infinite loop) can be set.

Control equipment to turn on and off, do switch fatigue test, voltage sag and other tests to verify the reliability of customer equipment.

Delay starts load, delay time can be set, after the delay, it will be turned on or intermittently.

3.3-30V wide voltage input, with starts and stop button, and 5.08mm terminal wiring.

Two modes can be selected, PWM mode and pulse mode, you can choose depending on your demands.

PWM Mode: Frequency (continuous) and duty cycle adjustable. Note that the number of off and on times cannot be set in this mode, which keeps cycling on and off.

Pulse Mode: Positive pulse width time, negative pulse width time, -on delay starts time, and number of pulses are adjustable. All setting parameters are not lost on shutdown.

Digital display with wide viewing angle design, the display has "%" for PWM mode, the right side of the display without "%" for PULSE mode.

Specifications:

Name: PWM Driver

Material: plastics

Operating voltage: 3.3-30V (note that the positive and negative poles should not be reversed, otherwise it may burn-up)

Frequency ranges: 1Hz-150KHz, accuracy is about 2%. Motor speed control generally choose 20KHZ

Duty cycle ranges: 0-100 %, 1% step

Number of pulses: 1-9999, or infinities (display "----" represents infinities)

Delay output time: 0.000s-9999s, minimum 1ms can be set

Positive and negative pulse width length: 0.000s-9999s, the minimum can be set to 1ms

Output load carrying capacity: less than 8A (MOS switching tube)

Output amplitude: amplitude equal to the supplying voltage (OUT+ and V+ module internal direct connection)

Item size: 79 * 43 * 30mm / 3.11 * 1.69 * 1.18in

Item weight: 42g / 1.48ounce

Package size: 80 * 30 * 45mm / 3.15 * 1.18 * 1.77in

Package weight: 45g / 1.59ounce

Packing List:

1 * PWM Driver

We confidently assure you'll be satisfied with what you get.However, If  there's a chance that you are not satisfied with our goods or something else, please let us know before leaving us a Negative feedback. We will try our best for 100% customer satisfaction. Your 5-Star Positive Feedback is much appreciated to us, and your satisfaction is our greatest motivation to move forward.Welcome to Shop Here! Want more Items? Please come & visit our SHOP.

*Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 5 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer).Your satisfaction is our first priority.

*If you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.