DC12V 4 Wire PWM Fan Temperature Control Governor Mini Temperature Speed Digital Display Board support 3A fan shutdown

DC12V 4 Wire PWM Fan Temperature Control Governor Mini Temperature Speed Digital Display Board support 3A fan shutdown

Features:

1. Support four-wire fan speed regulation.

2. Supports low temperature shutdown of fans within 3A, can directly turn off the fan power, and supports back-to-sequence fans.

Specification:

Fan current: no more than 3.3A

Design power supply voltage: DC12V

PWM signal amplitude: 5V (no load)

PWM frequency: 25KHZ (plus or minus 1KHZ)

Temperature measurement range: -9.9-99.9℃

Circuit self-consumption: le than 40mA (tested at 12V)

PWM range: 1-100 (signal percentage is not actual speed ±0.5%)

Voltage range: DC8-16V (circuit operating voltage, please pay attention to the fan voltage range)

Temperature measurement error: the error in the range of 0-50°C is lower than 1.2°C, and the error in other ranges is lower than 2°C

Notice:

1. This control only controls the speed adjustment of the fan controlled by the four-wire standard PWM signal. The signal specification is 25KHZ 5V. Conventional chais, CPU and many server four-wire fans support it, but it cannot control the speed regulation of 2-3 wire fans!

2. The difference between the acceleration temperature and the full speed temperature should not be lower than 5°C, and the difference between the shutdown temperature and the acceleration temperature should not be lower than 2°C. When modifying the parameters, if the value breaks the above temperature difference, the program will automatically adjust the other two parameters.

Display descrtion:

Three-digit digital tube: display specific parameters and values

LED "×10 RPM": Speed unit light This light is on and the digital tube displays the fan speed. The value is the value after dividing the speed by 10. For example, if 256 is displayed, the actual fan speed is 2560RPM (revolution/min)

LED "℃": temperature unit light, this light is on and the digital tube displays the temperature measured by the current probe

LED "RUN": Fan running indicator light on when the fan is running and off when the fan is off

Shping list:

Module X1

Sensing line X1

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.