DC Boost Converter Constant Current Mobile Power Supply 250W 500W 600W 10A LED Driver Module Non-isolated Step Up Module

250W:

Module: 250W boost constant current module

Module properties: non-isolated step-up module (BOOST)

Input voltage: DC 8.5V-48V

Input current: 10A (MAX) exceeds 8A please enhance heat diation

Quiescent current: 10mA (12V liter 20V. the output voltage. the higher the current will increase too quiet)

Output voltage: 10-50V continuously adjustable

Constant] range: 0.2-8A

Temperature: -40 to + 85 degrees (ambient temperature is too high. please enhance heat diation)

Operating frequency: 150KHz

Conversion efficiency: up to 96%

Overcurrent protection: There

Input reverse polarity protection: Yes.

Installation: 4 3mm screw holes

Connection method: Connection Output

Module size: Length 70mm width 36mm height 13mm

Single module: 65g

500W: [Module name]: 500W boost constant current module

[Module nature]: Non-isolated boost module (BOOST)

[Input voltage]: DC8.5V-48V

[Input current]: 15A (MAX) over 8A, please strengthen heat diation, otherwise it may be damaged

[Static working current]: 10mA (when 12V rises to 20V, the higher the output voltage, the higher the quiescent current will increase)

[Output voltage]: 10-50V continuously adjustable

[Output current]: 10A MAX (related to the input and output preure difference, the greater the preure difference, the smaller the output current, if the output current exceeds 5A, add a heat sink or fan for heat diation)

[Constant current range]: 0.2-10A

[Output power]: = input voltage*10A, such as: input 12V*15A=180W, input 24V*15A=360W,

Input 36V*10A=360W, input 48V*10A=480W, and,

If you need more power, you can use two modules in parallel. For example, if the output is 10A, you can use two modules in parallel and adjust the current of each module to 5A.

[Working temperature]: -40~+85 degrees (please strengthen heat diation when the ambient temperature is too high)

[Working frequency]: 150KHz

[Conversion efficiency]: up to 96% (efficiency is related to input, output voltage, current, and preure difference)

[Overcurrent protection]: Yes (output over 10A, automatic protection, there is a certain range of error. The protection mode is to stop the boost, the output still has voltage)

[Input reverse connection protection]: Yes, (le than 5A, if you need more reverse connection current, please connect the input diode in series)

[Module size]: length 70mm width 42mm height 13mm

[Module weight]: 50 grams

600W:

Product sellin 1: High-power booster board 2: Large-size sendust magnetic ring, using 4 0.8 pure copper enameled wires, low heat generation and high efficiency 3: With indicator light: power indicator, working status is clear at a glance 4: ed capacitors are used for both input and output, with low output rple, low heat generation and long life 5: Widely used Features 1. Sampling high-quality aluminum substrate , the heat diation effect is very good, and the output power is greater. 2. The new ch has stable performance. 3. ed capacitors are used for both input and output, with low output rple, low heat generation and long life. 4. ed 100A high-power MOS tube is used, with large power margin and good dynamic response. 5. The large-size sendust magnetic ring adopts 4 0.8 pure copper enameled wires in parallel, which has low heat generation and high efficiency. 6. Brand-new design, conversion efficiency up to 96% (see the efficiency conversion curve in the data sheet below for details). 7. Brand 3296W multi-turn potentiometer, with high adjustment accuracy and small drift. 8. Alloy resistance output current sampling, constant current and stable temperature drift. 9. With undervoltage protection, it can effectively protect all kinds of batteries, and it can also be used for solar cells. 10. With constant current function, it can be used to boost battery cars, charge batteries, and so on. 11. With indicator light: power indicator, working status is clear at a glance. Function introduction The output voltage and current are adjustable, and can be boosted and constant current Input undervoltage protection Scope of application 1. DIY a regulated power supply, input 12V, output can be adjusted from 12-50V. 2. To supply power to your electronic equment, you can set the output value according to your system voltage. 3. As a vehicle power supply, power your laptop, PDA or various digital products. 4. DIY a high-power notebook mobile power supply: equped with a large-capacity 12V lithium battery pack, so that your books can be bright wherever you go. 5. The solar panel voltage stabilizes. 6. Charging batteries, lithium batteries, etc. 7. Drive high-power LED lights. Pin method: IN＋input positive, IN－input negative, OUT＋output positive, OUT－output negative CV voltage regulation, CC current regulation Voltage regulation: Use a flat-blade screwdriver to adjust the output terminal "CV-ADJ" potentiometer (marked in the figure below) when the power supply is switched on and there is no load. The response will be slower when the high voltage is adjusted to the low voltage. The adjustment range of the instrument is smaller. (The default output voltage is adjusted to about 24V for shment. If we need to adjust other voltage values, please explain or leave a meage) Current regulation: Adjust the "CC A-ADJ" potentiometer counterclockwise for about 30 turns, set the output current to that, connect the LED battery and other loads, and adjust the "CC A-ADJ" potentiometer clockwise to the current you need. For battery charging, after the battery is discharged, connect to the output and adjust CC A-ADJ to the current you need. When charging, you must use the discharged battery to adjust, because the battery is left The more power, the lower the charging current. The default output ESC is 10A for shment. If we need to adjust the current value adjustment instructions or leave a meage. Do not use the short-circuit output method to adjust the current. The circuit structure of the boost module cannot be adjusted by the short-circuit method. New: Input low battery protection Low battery protection is mainly aimed at preventing battery over-discharge when the input power is a battery, and the battery voltage is too low to damage the power supply module and battery. When the input is a switching power supply, low-voltage protection should also be set. The undervoltage protection is fixed at 9.7V. Precautions (1) The output positive and negative poles cannot be reversed or short-circuited. (2) Pay attention to ventilation and heat diation when working with large current and high power for a long time with full load to extend the service life of the power supply. (3) The module can only step up but not step down, and cannot supply power to electrical equment lower than the input voltage, such as charging a 12V battery with a 24V battery or charging a capacitor. Supply power to the lED lower than the input voltage (4) Do not work at full load for a long time, please leave a 20% margin when working continuously, pay attention to ventilation and heat diation common problem 1. Why is my module designed into this shape? Answer: Our module is designed to be directly fixed on the machine for your convenience. You can fix the module on your machine through 4 copper posts. 2. How efficient is the module work? Can I use it on a battery that requires high efficiency? Answer: The working efficiency of this module is very high, our actual test rate can reach 98.1%. 3. Does this power module have short-circuit protection? Will it burn out if the output is short-circuited accidentally when I use it? Answer: Our module does not have short-circuit protection. When your output is short-circuited, the module will be burnt out. You need to pay special attention when using it. Do not short-circuit. 4. Does this power module have input reverse connection protection? Will it burn out if I accidentally connect the input power to the wrong side when I use it? Answer: It will burn out, our module does not have reverse connection protection. 5. The working voltage of the module is 10-50V, so can I input 12V and output 48V? Answer: Yes. This module is a boost module. 6. Can the current of this module run for a long time at 24V 10A? Answer: The design power of this module is 600W, and it can run for a long time at 600W power (a fan is required for forced cooling), 48V*10A=480W, so it can run for a long time. 7. I need about 20A current, can this module work in parallel? Answer: When the input power is supplied separately, the output can be directly connected in parallel, and the power is doubled. When the inputs are all connected to the same power supply, this is not poible. 8. What is the working environment temperature of this module, can it reach industrial grade? Answer: Yes, but when the ambient temperature exceeds 40 degrees, please reduce the power usage or strengthen the heat diation. 9. I think your module has a potentiometer. Will the output voltage suddenly increase due to damage to the potentiometer? Answer: No, the multi-turn precision potentiometer is used on the module. Its adjustment accuracy and reliability are very high. There will be no sudden increase in output voltage. You can use it with confidence. It is still recommended that bulk customers find us to customize the fixed output voltage. 10. I think your module has a power of 600W. If I output a voltage of 48V, what should the current be? Answer: This can be calculated. From the formula P=U*I, I=P/U, the output voltage is 48V and the current is 12.5A. Since the output current of the module is about 20A, the output current is 20A. 11. The working voltage of the module is 10-50V, so can I input 12V and output 50V 600W? Answer: No. Input 12V can output 50V, but if you want to output 600W power, the input voltage must be above 24V.

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.