DC 6-120V Acid Lead Battery Indicator Lithium Battery Capacity Digital LED

DC 6-120V Acid Lead Battery Indicator Lithium Battery Capacity Digital LED Tester Free Shping with Track Number 12003143

Descrtion:

Current Consumption: 5-15mA

Operating Voltage: 6-120V

Power Resolution: ≤1%

Voltmeter Accuracy: Approx. 1%

Working Temperature: -20 ~ + 70°C

Working Humidity: 10 to 80% (non-condensing)

Dimensions: Diameter 54mm

Long life LED, high temperature resistance, anti-vibration.

Low power consumption

Easy to install

Note: This tester is universal for Lithium and lead-acid batteries, the factory default setting for 48V lead-acid battery, power and voltage cycle display,If you need to test other specifications, you can re-set by yourself.

How to adjust：

The back of the board has a white high on, pre the on 3 seconds to display 1-u , release the key, pre the 1-second display 2-b , release the on, short pre 1 seconds to display 3-c , release the on, short pre 1 seconds display 4-D ;

The display 1-u pre the key 3 seconds, you can adjust the voltage measurement, then loosen the on and then long pre, the voltage upward fine-tuning, stop pre again long, downward fine-tuning, can be adjusted over and over, after the screen flashing automatically save exit;

When the display 2-b can adjust different battery types, long pre on can change the value.12.0V represents Tan Jie 12V lead-acid battery, 3.7V representative Tan Jie for 3.7V polymer lithium battery, 3.2V representative Tan Jie for 3.2V lithium iron phosphate, 1.2V representative Tan Jie for 1.2V ni-MH battery;

When the display of 3-c , you can adjust the number of battery section, long pre on can change the value.Different types of battery can be adjusted as follows: 12V lead-acid battery 1-8, 3.7V lithium battery 2-28, 3.2V lithium-ion battery 3-32, 1.2V ni-MH battery 10-70 section. 5, when the display-D, you can adjust the display mode, long pre on can change the value.

When the display-D, you can adjust the display mode, long pre on can change the value.V is voltage mode,% is percent mode, v% voltage and percent loop display.

Each adjustment value set, after the screen flashing automatically save exit, before the next operation, otherwise the new adjustment value will not be saved!

Setting Example:

1.Set lead Acid 48V , display mode is only show percent

The 48V lead-Acid Battery (4 section 12V series) is set as follows: Select 12.0V in 2-b , select 4 in 3-c , select % in 4-D ;

2. Such as the setting of Polymer lithium 60V (16 series 3.7v lithium), display mode is only to show the percentage

60V Polymer Lithium (generally 16 series) is set as follows: Select 3.70V in 2-b , select 16 in 3-c , select % in 4-D ;

1 x DC 48V Battery Capacity Tester Voltmeter

1 x Fixed bracket

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.