DC 5V AC Digital Temperature Controller -60~500 Degree K-type M6 Probe Thermocouple Sensor Embedded Thermostat

DC 5V 12V 24V 110V 220V AC Digital Temperature Controller -60~500 Degree K-type M6 Probe Thermocouple Sensor Embedded Thermostat

Descrtion:

K-type thermocouple thermostat function: The product has a total of four keys, plus, minus, SET (set key), reset key. There are two sets of digital tubes to display the actual temperature and the set temperature, respectively. All parameters are automatically memorized after 5s.

Specifications: Product name: High temperature K type thermocouple thermostat Power Supply:5V DC/12V DC/24V DC/110V-220V AC Temperature control range: -60℃ ~ 500℃ Cable Length:42cm Temperature measurement accuracy: 1 ℃ Resolution: 0.1C Refresh frequency: 0.5S Measuring input: type K thermocouple Output: One 10A Relay Opening size: 74mm (length) * 39mm (width)

Code table:

Code

Function

Set Range

Default

P00

Heating/Cooling

H/C

C

P01

Return Difference

0-50

2

P02

Temp. Correction

-10-10

0

P03

Max Temperature Alarm Value

500

P04

Min Temperature Alarm Value

-60

P05

Data Lock

OFF

Wiring Diagram:

5V 12V 24V DC:

110V-220V AC:

Package Include: 1 x AC 110-220V/DC 5V 12V 24V Digital Thermostat Temperature Controller -60-500 Degree 1 x Sensor Probe Cable Instructions: Red digital tube: actual temperature, Blue digital tube: set temperature Pre key to increase: increase the set temperature. Pre the key to decrease: decrease the set temperature. Restore factory settings: Pre and hold the on plus and minus 5 seconds or more to restore the setting data. Set key (SET): 1. Pre SET shortly to increase the temperature by 50 ° C each time. The user can first pre SET to quickly set the temperature near the preset temperature, and then adjust the temperature to the preset temperature by adding or suracting keys. 2. Pre and hold SET to enter the parameter setting option. There are several groups of parameters P00 ~ P05 for users to set. After entering the parameter interface, short pre SET can switch P00 ~ P05. Set the corresponding data by preing the plus or minus key under the corresponding parameter. After setting, the system will automatically memorize the data and return to the display interface. P00: H heating mode / C cooling mode P01: Temperature difference backlash (0~500°) P02: Temperature correction(-10~10°) P03: Maximum temperature alarm value (500°) P04: Minimum temperature alarm value (-60°) P05: Data lock (ON/OFF) Application 1: This thermostat can be widely used in boiler water temperature control, water dispenser water temperature control and automatic cupboard water temperature control. Application 2: This thermostat can be used for printer equment, hatch control, and intelligent control of refrigerator air conditioners. Application 3: This temperature can be widely used in the fields of intelligent agricultural control, greenhouse temperature control, and automatic irrigation. About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.