DC 5V 18650 Digital LCD Display Lithium Li-ion Battery Tester Meter Type-C Voltage Current Power Bank Capacity Monitor Module

Package : Type-Cis_customized : YesModel Number : Battery Capacity TesterOperating Temperature : Measurement Battery Power Detector ModuleDissipation Power : LCD Display BatterySupply Voltage : 18650 Lithium BatteryApplication : BatteryCondition : NewType : Voltage RegulatorBrand Name : diymore : Mainland China
A:Specification::Product name: 18650 battery capacity internal resistance tester charging and discharging integrated version:Working voltage: DC5V:Detection voltage: ≤DC5V:Capacity measurement range: 0~99999mAh:Energy measurement range: 0~99999mWh:Battery internal resistance measurement: support, measurement error is about 10%:Display real-time voltage: support:Display real-time current: support:Display real-time power: support:Log run time: support:Working mode indication: support:Current Status Indication: Supported:Simultaneous discharge: not supported (simultaneous discharge of 18650 battery Test① and external power supply Test② is not supported):Discharge load: 10W 8ΩJ cement resistance × 2:Discharge current selection: ≈0.5A or ≈1A:Charging interface: Type-C:External discharge interface: Type-C:Preset discharge stop voltage: 3V (not adjustable):Preset full stop voltage: 4.2V (not adjustable):Data storage: The measurement data is not saved, and the accumulated data is automatically cleared when the power is turned off or when the working mode is switched.:Product size: 108×85×24mm:Product weight: 80g (net weight)Charge and discharge time reference::AUTO (automatic mode): The battery (discharged in advance) is charged ~ the default current is about 1A to discharge 1704mAh ~ it is fully charged again to trigger the program to stop, which takes 437 minutes and 23 seconds.:DSG (discharge mode): When the battery is fully charged, it uses a current of about 1A to discharge 1681mAh, which takes 118 minutes and 55 seconds.:CHG (Charging Mode): The capacity and energy are not measured during charging, only the time is recorded, which takes 164 minutes and 51 secondsB:Specification::Product name: 18650 lithium battery true capacity tester :Display accuracy: 0.1 :Measurement accuracy: 1mAH :Power supply voltage: DC5~12V/18650 battery power supply :Standby current: 5~7mA :Discharge current: about 500mA :Load power: 10W8Ω:Appearance size: 110*80*25mm :Installation size: 72*53 :Installation aperture: 3mm ?About 18650 battery::The minimum discharge stop voltage of 18650 battery is generally: 2.75V. Under normal circumstances, when the voltage drops to 0.875 times the rated voltage (3.24V) :It should be charged, and then continue to use, the voltage will drop rapidly, there may be over-discharge and damage, affecting the life. (Recommended discharge termination (The voltage is set to 3.5V) :The charging voltage is generally: 4.20V-4.3V/4.35V. ?Measurement time calculation::Assuming that the battery capacity is 2000mAH, the discharge current of this tester is about 500mAH, (2000:500=4), and the measurement time is about 4 hours about. Package Contents::18650 Battery Capacity Detector module Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.