DC 1500W 30A Voltage Step Up Boost Converter CC CV Power Supply Module Step Up Constant Current Module 10-60V to 12-97V Fan

1200W 20A: Feature: Input voltage: 8-60V Input Current: 20A Quiescent current: 15mA (12V liter 20V, the output voltage, the higher the current will increase too quiet) Output voltage: 12-80V continuously adjustable Output Current: 20A MAX Over 15A, please enhance heat diation (input, output preure related, the greater the preure the smaller the output current) Constant Range: 0.5-20A Output Power: Input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Enter 36V * 20A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W If you need more power, you can use two modules in parallel, such as the output to 30A, two modules can be used in parallel, The current per module can be adjusted to 15A. Working temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat diation) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input and output voltage, current, preure related) Overcurrent protection: Yes (with reduced flow adjustment, adjustable output current limit, current exceeds the current limit, the output current is automatically reduced to a minimum 5A, vary according to the nature of the load current will be.) Short circuit protection: Yes (input 20A fuse) double short circuit protection, the use of more security. Input reverse polarity protection: None, (if neceary, please enter the string into the diode) Output Counter filling: Yes, for charging plus blocking diode is not required. Installation: four 3mm screws Connection: solderle terminals output Package Contents: 1 x1200W 20A DC Converter Boost Power Supply Module 8-60V 12v Step-up12-83V 24V48V

1500W 30A:

Descrtions:

Module name: 1500W boost constant current module

Module properties: non isolated boost module (BOOST)

Working temperature: -40~+85 degrees

Working frequency: 150KHz

Conversion efficiency: 92%-97%(efficiency have an effect on input voltage, output voltage,current and preure difference)

Installation: 4pcs 3mm column

Connection mode: Terminal blocks (please use big current and pure copper wire)

Module size: 130mm x 52mm x 84mm(L x W x H)

Specifications:

Input voltage: 10-60V

Input current: 30A(10-30V input)

25A(31-60V input)

Static operating current: 15mA

Output voltage: 12-90V continuous adjustable (default output 19V)

Output current: MAX 20A, over 15A please strengthen the cooling (have an effect on input and output,

differential preure, the greater the preure difference between the input voltage and output voltage, the smaller the current is )

Constant current range: 0.8-20A (+/- 0.3A)

Output power: = input voltage x 30A

Feature:

1.Over current protection: there is a certain range of error in the input over 35A,automatically reducing the output voltage.

2.Short circuit protection: there is (input 30A fuse) double short circuit protection,more secure to use.

3.Input reverse polarity protection: there is (150A MOS tube to avoid this).

When using the boost power supply should pay attention to the followins:

1. the output polarity cannot be reversed or short circuit.

2. when using batteries as the input source, you must lower the battery protection,

otherwise it will damage the battery and power supply

3. Input power supply voltage must be above 10V.

4. When the power supply is used for the input power supply,

the input power and the output voltage of the input power supply are the first to be unloaded.

Then pick up the load.

(must ensure that the switching power supply has been working).

5. When the constant current mode is used to set the voltage, the constant voltage must be higher than the input voltage.

Do not use the way of short circuit output current,the circuit structure of the boost module can not be adjusted in short circuit way.

6. If the input voltage fluctuation range is lower than the set output voltage,then the output voltage is constant,

it is to ensure that input is lower than the output voltage.

Package included:

1 x 1500W boost constant current module

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.