e prograng

Working mode:

1. Inching mode: press the e control the relay will connect, and then release the e control to disconnect the relay;

2. S-locking mode: press the e control the relay will connect, and then press the e control again to disconnect the relay;

3. Interlomode: press the e control key A to connect the relay, and press the e control key B to disconnect relay.

4. Delay mode: press the e control the relay will connect, release the e control and start timing. After 5S, 10S and 15S 3 gears, the relay will be automatically closed.

Learning Methods:

1. Inching learning method:

Press the code pairing on on the control panel once, and the LED indicator will f once. After the LED indicatorlit, press the on you need to pairing on the e control, the LED indicator on the control panel will f for 3 times which means the pairing succeed.

2. S-locking learning method:

Press the code pairing on on the control panel twice, and the LED indicator will f twice. After the LED indicatorlit, press the on you need to pairing on the e control, the LED indicator on the control panel will f for 3 times which means the pairing succeed.

3. Mutual lolearning method:

Press the code pairing on on the control panel three times, and the LED indicator will f three times. After the LED indicatorlit, press the on you need to pairing on the e control, the LED indicator on the control panel will f for 3 times which means the pairing succeed.

4. 5S delay learning method:

Press the code pairing on on the control panel four times, and the LED indicator will f four times. After the LED indicatorlit, press the on you need to pairing on the e control, the LED indicator on the control panel will f for 3 times which means the pairing succeed.

5. 10S delay learning method:

Press the code pairing on on the control panel five times, and the LED indicator will f five times. After the LED indicatorlit, press the on you need to pairing on the e control, the LED indicator on the control panel will f for 3 times which means the pairing succeed.

6. 15S delay learning method:

Press the code pairing on on the control panel six times, and the LED indicator will f six times. After the LED indicatorlit, press the on you need to pairing on the e control, the LED indicator on the control panel will f for 3 times which means the pairing succeed.

-Clearing the code :

Push the learning on on the receiver 8 times , the codes will be reset.

After clearing the code, will be need to be recalibrated

Input Voltage: 12 V-36V , RF working mode: rheterodyne

• Receiver sensitivity: > 97 dbm

• nsmitting distance:> 100 m open space

• De mode: MCU de

• e storage: 250

• Support e type: EV1527 learning code

• Working mode: Momentary, tole, latching time delay 5s ,10s ,15s

• Output terminal: NO , NC , COM

• e control battery: 2 x 3 V CR2016 on batteries

Note: Maximum input power is 250 V

10A relay with stable output and wide application

for Water Motor LED/Electric Appliance

for Family, Farm, Factory, Office, rmarket

for Garage, Light, Automated curtains, Fan, Door, Gate, LED, Lamps, Motor

Smart Home, Feel free to use it together

Learning Pair Code

it can work with any e control with the same frequency, so you needn& x27;t worry about losing e

control any more.if the e control is lost, buy one and pair with the board is Ok

100m receiving distance

Powerful chip, the receiving distance can reach 100 meters

ABS high-temperature resistant shell, safer

Package including

1*e Control+1*Receiver / Only 1*Receiver / Only 1*e Control

It depends on the model you choose