Damaged Screw Extractor, Bolt Extractor Kit 33 Pieces with Magnetic Extension Bit Holder, Socket Adapter for Broken Screw and Bolt Stripped

Damaged Screw Extractor, Bolt Extractor Kit 33
Damaged Screw Extractor - screw remover is made of High-Speed Steel, higher hardness and durability, making it easier to remove damaged screws.
Widely Used - Basically meet all your needs for various screws extracting. Such as hex bolts, lag bolts, hex bolts, machine screws, wood screws, sheet metal screws and other screws. A screw extractor set solves most of your home's problems with screw repairs, including wall panels, wood and sheet metal bolts. Important: CAN NOT used the hammer drill mode! Please use electric hand drill and must be low speed during use!
How to Use the Screw Extractor? Drilling the Screw. Select a drill bit slightly smaller than the screw. Hold the drill bits up to the screw or fastener you need to remove. The right one will be slightly less wide than the screw head. When you find the right one, attach it to your drill.
Line the drill bit up with the center of the screw. Place the drill bit in the divot you created earlier. Move slowly as you begin to drill. Too much force will damage the screw. Focus on holding the drill bit steady so it drills straight down into the screw head.
Drill a hole for the extractor. You will need to drill somewhere between 1⁄8 inch (3.2 mm) and 1⁄4 inch (6.4 mm) into the screw head. The depth depends on the screw extractor you have. Hold up the extractor to compare it to the hole you drilled. If the extractor doesn't fit, keep drilling to widen the hole.
Color: Silver
Material: high speed steel
Pulling out the Screw
Insert the extractor into the drilled hole. The spiral end of the extractor goes into the hole. You can tap it with a hammer to make sure it's in there, but don't force it. The loose end should have a tap handle, which looks like a T, for you to hold onto. Twist the extractor counterclockwise until you can't turn it anymore.
Twist the extractor with a wrench ordrill. Grip the top of the extractor with a wrench. Continue to twist it counterclockwise until the screw pops free. Many extractors are designed to work with drills. Attach the free end of the extractor to the drill and turn on the drill to turn the screw counterclockwise. It'll come out without much resistance.
Package Contents:
10*drill
10*extractor
10*screwdriver bit
1*extension bit holder
2*socket adapter
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !