Cycala Bicycle ion Alarm Rechargeable Wireless Anti-theft Motorcycle Bike Alarm with Remote Control

Reminder:

1.If you are worried about not knowing how to use the product, you can contact us and we will send you the document of the product manual by email. You can copy the text and translate it into the language you want.

2. Before the first use, please charge it first, and then it can be used normally after activation. It is recommended to use it again after it is fully charged

3.One host can be equipped with three remote controls, and one remote control can also control two hosts

4.We have plenty of stock,wholers can rest aured that orders.

Product Features:

●Upgraded 3 Levels Volumes Adjustable bike alarm has added a 3 levels volumes control function,maximum alarm volume is 115db. Adjust the volume of the bike alarm according to the needs of different times and occasions. Doors and windows can be equipped with this security al to effectively repel thieves and illegal intrusions and ensure the safety of family. Of course, it can also be installed on bicycles, scooter and motorcycles if neceary.

●Alarm System Anti-theft Product: The proce of installing on bicycles and motorcycles is very convenient, and it is safer than wires loand U-locks. With good sensitivity,host can be sounded with a slight touch and the response is very fast. Park your bike on the road and install this bicycle safety alarm so don't have to worry about your bike being stolen because it will sound a huge alarm when someone touches it. Car thieves are desperate too, so install it outside absolutely out of reach.

●Sensitivity Adjustment & Car Search Function: This car anti-theft motorcycle alarm can be changed to 3 kinds of sensitivity. If the sensitivity is high, tap the bicycle alarm to sound the alarm. You can adjust the alarm sensitivity as needed to prevent accidental touches. Please refer to the English Manual for the operation method. Use the ringtone on on the remote to find out where the car is parked, saving you time when you're looking for a car in a crowded parking lot.

●Battery Information & Battery Repment Method: Bicycle alarm host inside of the bicycle anti-theft alarm is a 400mAh (3.7V) battery, please use 2A USB charging cable to connect the adapter to charge the bicycle alarm, generally it can be fully charged in 3 hours . Wirele remote : 12V/27A, the remote control distance is about 30-50M. If the remote can't control the host, please rep the battery and then re-match the alarm panel with the remote.

●IPX5 Waterproof & Bracket Installation: The air tightne of the bicycle alarm is works very well, it will not affect its effectivene even in heavy rain, especially suitable for protecting the safety of the car in rain and snow weather. Main unit size 58*35*15mm. The light and small main unit can be installed in any position of the car with a cable tie. Since the mounting bracket and the body are separated, there is no need to cut the cable tie when charging or replacing the battery.

Product Specifications:

Remote control battery :12V/27A Alkaline battery

Alarm Battery Capacity :400mAh(3.7V)lithium battery

Remote control distance: 0-80M

Remote control size: 58x35x15 MM

Sound decibel: 115 dB

Applicable models: Applicable to bicycles, electric bicycles, electric vehicles, motorcycles,outdoor camping equipment and personal safety protection.

Please use our included 2A USB charge cable, you can connect to your PC USB port, or by your smart phone 5V/ 2A adaptor, or power banks.PC + ABS pure copper material material, IPX5 waterproof and dustproof, high and low temperature resistance, not afrof wind and rain, cold and heat.The remote controller can remotely control the alarm, and the remote controller can control the alarm within 0-80m of the open distance, which can help you find your itThe maximum volume can reach 115dB, and the volume can be adjusted. The car level volume can effectively deter thievesAlarm ion sensitivity setting: Pre and hold the remote control [ Disarming ] on until the remote control LED lights up again, and the alarm will have a "Bi" sound. At this time and then pre the remote control [ Arming ] on, each time you pre, the ion sensitivity switch level. Sensitivity has 3 levels adjustable: high - medium - low. The corresponding sound is "BiBiBi (high)", "BiBi (medium)" "Bi (low)", after setting, pre the remote control [ Disarming ] on to exit the settlevels of volume can be set: high - medium - low. Pre and hold the remote control [ Disarming ] on and do not release your hand until the remote control LED lights up again, while the alarm will have a "Bi" prompt, at this time in the remote control [ Alarming ] on, each pre, switch the volume once, each switch to play the corresponding volume of "Bi" sound. When the setting is finished, pre the remote control [Disarming ] on to exit the setting.Ringtone Setting: When it is not in the armed state, you can set 5 kinds of ringtones. Pre and hold the remote control [ Disarming ] on until the remote control LED lights up again, while the alarm will have a "Bi" sound. At this time in the remote control [ Ringtone ] on, each time you pre, the bell switch once, and play the corresponding ringtone. When the setting is complete,pre the remote control [ Disarming ] on to exit the setting. The five ringtones are "horn sound 1","horn sound 2", "horn sound 3", "bird sound" and "di-di sound".Applicable to bicycles, electric bicycles, electric vehicles, motorcycles, outdoor camping equipment and personal safety protectionInstallation of Remote Control: (1) The remote’ bracket is fixed with a tie in a position that is easy to touch with the left and right thumbs. (2) P the remote. (3) Pre and hold the bottom snap position of the bracket to remove the remote. Installation of Bracket:(1)Choose any position on the bike where it can be fixed.(2)Secure and tie down the main unit and cut off the exce tie.(3)Insert the main unit into the fixing bracket and tighten thescrew.(4)The main unit can be removed by loosening the screw in an anti-clockwise direction.