Installation of speed cruise advantage: Emancipation of the feet can reduce the fatigue of long-distance driving. Increase the fun of driving
Make the engine get the best output torque and reduce fuel consumption.
Important point: It seems that all high-end cars are equipped with cruise control system.
The use of the speed cruise control system:
Cruise opening: when normal exercise (speed is more than 40KM), first press the ON-OFF button on the top of the cruise handle, the green cruise light rises, then the handle is moved down (-SET direction), the right foot loosens the accelerator pedal, and the cruising begins. After cruise is open, you can add and drop speed at will (push +RES to speed up) (dial -SET to decelerate).
Cruise suspension: brake immediately (not closed); when the cruise is started, the direction of the steering wheel (the direction of the CANCEL arrow) is pulled, and the cruise is immediately lifted (not closed).
Cruise recovery: dial up the cruise handle (+RES arrow direction).
Cruise shutdown: press the ON-OFF button at the top of the cruise handle directly, and the green cruise lights go off and Cruise off.
Fit for:
For Toyota
4Runner 2006 - 2014
Camry 2006 - 2014
Corolla 2010 - 2014
FJ/Cruiser 2008 - 2014
Highlander 2006 - 2014
Land Cruiser 2006 - 2014
For Toyota Matrix 2009 - 2014
Prius,V,C 2009 - 2014
RAV4 2008 - 2014
Sequoia 2006 - 2014
Tacoma 2006 - 2014
Tundra 2006 - 2014
Yaris 2006 - 2014
Auris 2008 - 2014
For Scion
For Scion TC 2007 - 2014
For Scion xB 2007 - 2014
For Scion xD 2007 - 2014
For Lexus (replacement switch and harness pins)
ES300 2004-2014
ES350 2006-2014
GS450H 2006-2014
GX470 2004-2014
IS F 2007-2014
IS250 2005-2014
LX470 2004-2014
LX570 2007-2014
RX330 2004-2014
RX400H 2005-2014
Colour: black
Material: ABS
Package Contents:
1 * Cruise control switch install wire
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.