This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
In stock
Shipped from abroad
Free return within 15 days for all eligible items.Details
Meijiahui
60%Seller Score
Be the first to follow
This seller does not have enough history for us to evaluate his performance yet
Model: K190
Main Light Lamp Wick: XPG Second Generation
Main Lamp Power: 5W
Main Light Gear: Strong Light and Low Light Flash
Product Size: 32*43*58(mm)
Net Weight: about 62G (Excluding Packaging)
Color Box Size: 53*130 * 190mm
Carton Size: 49*22.5 * 43.5cm
Material: Abs
Battery: Polymer Soft Bag
Charging Method: Mic Interface
Zoom Mode: Non-Zoom
On the Right Side of the Switch Regular Function, Click: Main Light Strong-Main Light Weak-Main Light Flashing-Auxiliary Light on-Main Light Auxiliary Light on-Auxiliary Light Red and Blue Flashing
The Sensor Function of the Switch on the Left Side Can Wave and Sense Which Gear to Press.
When Starting up, the Left and Right Four Blue Indicator Lights Will Be on for 2 One Cycles from inside to outside at the Same Time.
If Any Gear Stays for More than 8 Seconds, Click Shut down!
Battery Size 803040, Capacity 900MAh
Waterproof Grade: IPX5
Lumen: Single Lamp 180, Double Lamp 260 Lumen
1. Instructions for Use of the Switch
1. the Battery Is the Positive Pole Facing inside (the Side of the Lamp Holder), and the Negative Pole Facing outside (the Tail).
2. the Switch Is at the Tail, the Switch Function Bearing Switch Is the Switch Function, and the Light Switch Is the Dimming Function.
II. Circuit Board Instructions
1. Our Store Torch Adopts Advanced Constant Voltage and Constant Current Technology, Which Can Effectively Solve the Requirements of LED Torch for Constant Voltage and Constant Current.
2. Special Tips: A. Do Not Use It over Pressure, and the Voltage Should Not Exceed 4.2V B. The Battery Is Facing Forward, Do Not Set It in Reverse, Otherwise It Will Burn Plate C. Pay Attention to Controlling the Temperature Change of Torch to Ensure Heat Dissipation D. Do Not Open the Circuit Board for Non-Professionals.
3. Warranty Description: No Longer Covered by Warranty after Opening Or Handling the Circuit Board.
III. Lithium Battery Instructions
1. Features of Lithium Battery: the Charging Method of Lithium Battery Is Completely Different from That of Mobile Phone Battery; Lithium Battery Has No Memory, and Can Be Charged at Any Time, and Should Not Be Overcharged Or Overdischarged.
2. It Takes at Least 6 Hours to Charge for the First Time. in the Future, It Will Be OK to Turn on the Green Light According to the Charger. It Is Not Necessary to Overcharge.
3. Special Tips: Use Ldquo with Anti-Overcharge, Anti-Reverse Connection, and Anti-Short Circuit; Three-Proof Rdquo; Charger;
4. If You Do Not Use the Battery for a Long Time, You Should Fully Store the Power, and Charge and Discharge It Normally in about Three One Months;
IV. Instructions for Torch
1. When Using Torch, Choose According to the Requirements of Torch for Voltage and Battery. Do Not Use It Indiscriminately to Prevent the Circuit Board from Being Burnt out. Do Not Use Batteries of Different Models and Voltages at the Same Time.
2. in Use, When the Brightness of Torch Changes Significantly, Turn off Torch to Prevent Battery Overdischarge.
3. Heat Dissipation Skills: Torch Ensure Heat Dissipation during Use. It Is Strongly Required That When the Battery Is Fully Charged, It Is Better to Use the Second Gear First, Which Can Extend the Product Life of Torch Lamp Holder and Battery! Torch Light Cannot Be Directed Directly into People's Eyes, Which Is Super Bright and Dazzling, So as Not to Affect Eyesight, Especially Children.
V. Troubleshooting
1. Check the Battery: Make Sure That the Battery Has Electricity and the Battery Is Installed in the Correct Direction. Batteries of Different Brands Cannot Be Used. New and Old Batteries Cannot Be Mixed.
2. Check Tail Hood: Make Sure That the Switch Is Tightened and in Good Contact, Ensure That the Tail Hood Copper Cylinder Is in Good Contact with the Tail Hood Pressure Ring Metal Sheet, Pay Attention to Whether the Lamp Holder Is Loose
We Do Wholesale Sales Here. Because the Quantity Ordered by Customers Is Different, We Cannot Calculate the Postage like Retail. the Postage Is Calculated According to the Quantity (Weight) in the Order, freight Paid (Cooperative Express STO), Or Freight Paid on Arrival. Please Understand
The Quantity Is Small, and the Quantity Is Large. Contact Customer Service for Details, Thank You
This product has no ratings yet.
Subscribe to our newsletter
and be the first one to know about our amazing deals!