Power on Power on key function introduction 1. Short pre the switch to turn on the machine, start the charging mode, low gear, and the power indicator light is on. 2. Short pre the power on after booting to make the mode work or pause Mode/gear on Introduction to the use of mode shift 1. Short pre the mode on to switch the intensity level after booting, and long pre the mode on to switch the mode 2. Long pre the power on to shut down, open the vae to deflate Gear display: divided into low/high/medium three gears Power display: USB charging mode/wirele use Mode function introduction Inflation mode: two vaes are closed, low-end inflation for 10 seconds, mid-range inflation for 15 seconds, and high-end inflation for 20 seconds Maage mode: first inflate for 20 seconds, then turn off inflation and deflate for 24 seconds at low gear, deflate for 16 seconds at middle gear, and deflate for 8 seconds at high gear Deflation mode: turn off inflation, low-end deflation for 8 seconds, mid-range deflation for 16 seconds, high-end deflation all the time Ts 1. It can work when charging, the power indicator breathes when charging, and it is always on when it is full 2. When the battery power is only 5%, the power indicator flashes quickly at a frequency of 2HZ, and stops working when the battery is low. The power indicator flashes at a frequency of 1HZ. Automatically shut down after 6 flashes at a slow rate 3. It will automatically shut down if it has not been used within 10 seconds after starting up, and it will shut down after 15 minutes of no operation after starting up. 4. Static (standby) current