Combo Set Pre-wired Digital Dural Stage Humidity Controller IHC200 and Heating Cooling Temperature Controller ITC-308

INKBIRD Combo Set Pre-wired Digital Dural Stage Humidity Controller IHC200 and Heating Cooling Temperature Controller ITC-308

ITC-308: Dual relay allowing you to easily connect with refrigeration and heating equment to realize ideal temperature control. IHC-200: Switch the modes between humidification and dehumidification automatically. Features of ITC-308

Plug and play design, easy to use;

Dual relay output, be able to connect with refrigeration and heating equment at the same time;

Support reading with Cende or Fahrenheit unit;

Maximum output load: 1000W(110V)/2000W(220V);

Dual display window, be able to display measured temperature and set temperature at the same time;

Temperature calibration;

Compreor delay protection for refrigeration control;

High and low temperature alarms are available;

Over-temperature and sensor fault alarm;

Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.

Descrtion of ITC-308 ITC-308 is an easy-to-use, safe and reliable dual relay output temperature controller. D esigned with compreor delay protection for refrigeration, high and low temperature alarm, and sensor fault alarm, which makes the ITC-308 more safe and reliable. Functions such as temperature calibration, separately set differential for refrigeration and heating, enable more accurate temperature control. With large output power 1,000W(110V) /2,000W(220V), it’s suitable for most applications.   It can be used as Over-temperature protection and automatic temperature control system for various electric appliances such as equment for home-brew, aquarium, pet breeding, incubation, BBQ, seedling heat mats, oven temperature control, terrestrial heat control, constant temperature cycle of heating pump, culture fermentation, accelerating germination, electric radiator, electric oven, etc.

Specification:

Temperature Control Mode :On/Off Control, Heating and Cooling

Temperature Control Range : -50~99 °C / -58~210 ° F

Temperature Resolution: 0.1 ° C / 0.1° F

Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)

Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F

Input Power: 100 ~240VAC, 50Hz/60Hz

Temperature Control Output: Max. 10A, 100V ~240V AC

Input Power Cable Length: 1.5m (5ft)

Output Power Cable Length: 30cm (1ft)

Alarm: High and Low Temperature Alarm

Sensor Type: NTC sensor (Including)

Sensor Length: 2m / 6.56ft

Relay Capacity: Cooling/ Heating (10A, 100-240VAC)

Storage Temperature: -20~ 60 ° C / -4~ 140 ° F

Storage Humidity: 20~85% (No Condensate)

Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)

Warranty: 1Year

Descrtion of IHC-200

It is an easy-to-use, safe and reliable dual relay output humidity controller. Its play-n-plug designed: Plug it into wall socket, set your controller’s humidification or dehumidification values to your need. It can maintain the humidity between humidification and dehumidification automatically. In addition, the humidifier and dehumidifier can be programmed separately, too.

The maximum electrical load is 10A. It can fit many residential humidifier and dehumidifier. It is widely used for mushroom, mini greenhouse, ventilator fan, crawl space, turtle enclosure, curing chanmber, snake cage, cage and so on.

Switch the modes between humidification and dehumidification automatically;

Control humidity by setting value and differential value;

Calibrate the humidity value;

Delay protection for control output;

Query current temperature;

Alarm when humidity exceeds high/low humidity setting value;

Alarm when sensor error or humidity exceeds limit;

Specification:

Power Input: 100 ~240VAC, 50Hz/60Hz

Power Output: Max. 10A, 100V ~240V AC

Humidity Measuring Range : 5%-99.99%RH

Humidity Control Range : 5%-99%RH

Resolution: 1%RH

Accuracy: ±3%RH

Sensor model: AM-2301

Sensor stability: