Cloud-box-m2 Wifi Module 2.0 For Mppt Solar Charge Controller Esmart3 Series And Wiser Series Solar Control Panels

Cloud-Box-M2 WIFI Module 2.0 For MPPT Solar Charge  Controller Esmart3 Series And Wiser Series Solar Control PanelsTwo type of working modes:
1.WIFI hotspot routing mode, Access Point(referred as AP mode below), In this mode , Cloud-Box-M2 acts as hotspot, allowing other wireless terminals devices access and providing data access;2.The wireless terminal mode, Station (referred TA modebelow), Cloud-Box-M1 can be connected to the router WIFI hotspots, but itself does not accept wireless access.Usage of Key instructions：
Exit/Default Press: Click on on --- Switch to AP/STA mode
Long press for 6~8 seconds---To STA mode, making Cloud-Box-M1 enter to STA pending state(Reset the pwords of router set in last time)
--To AP mode, reinitialize firmware after updating
Reset press: Reset switch.
Status indicator of working mode：
When restarting the power or pressing the Reset on:
If the “signal“ light will continue to shine for 10 seconds, then flashing, it means working in AP mode.
If the “signal” light flashing immediately, it means working in STA mode.
The steps of configuring in AP mode：
1.Ensure Cloud-Box-M1 under AP mode.
2.Search WIFI hotspot--”MyGreen-Solar-XXXX”in mobile, with the pword “88888888” to connect the hotspot.
3.Open APP in Mobile or Pad and come to home page, click on the "AP mode" in the upper- left to enter the monitoring center.
The steps of configuring in STA mode：
1.Ensure Cloud-Box-M1 under AP mode
2.Connect to the router hotspot on mobile
3.Make sure the Cloud-Box-M1 in the signal range of router.
4.Once Cloud-Box-M1 configured, with hotspot click on the "LAN search" to search device; under4G(or cellular) or connected to hotspot, click on the “Qr code scanning” scan Qr code of Cloud-Box-M1 to search device.
5.For the first configuring, open APP in Mobile or Pad and come to home page, click on the “Menu” in the top right, then click on the “Add Device” to input pword. After pressing “OK” to confirm, go ahead to search all the “Cloud-Box-M1” device in the signal range of router. Once matched, click on the “Back” in the upper-left come back to home page, choose the right one from the list to enter the monitoring center.

Manage the list of device：
On the home page,For IOS version, swe left and right to manage the list , select “Editor” then “Rename” working. selecting “Share QRcode” to Share the QR code of the current device; click on the “Delete”, deleting the current device information.（For Android version, long press the device needed manage in the list, and then appear a list read “Rename”,”Share QRcode”, “Delete”.）





About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.