Using detail:
1, if you are pasted on the surface of the glass or tile, because its material is relatively smooth, good to use a clean rag to dry the paste surface, so that it is easier to paste, and flat effect to good;.
2, some of the larger pattern paste, flattening may have a little bubble, then you can use a scratch card to remove the bubble or use a needle point to pierce the small bubble smoothing can, will not affect the overall paste effect;.
3, if the paste wall moisture, aging or just painted new paint, paste may cause the wall stickers automatically fall off, or will cause the wall surface peeling, you can use a h dryer hot to dry the wall or wait for the paint to evaporate after a of time and then paste, but the effect may , so please be careful to choose the location of the paste;.
4, if you are not careful to paste the wall in the wrong place, you can use a small to gently lift the corner of the wall sticker off, re-paste can be, the product can be used repeatedly under normal circumstances, as long as not bad;.
5, the DIY series of products are tightly laid out size, you can play unlimited , to combine the arrangement of the shape and position, you can first use scissors to cut the pattern separately, cut the time to take care not to damage the pattern
Package include:
1pcWall sticker
Label: Yes