Cheap Factory Price Fixed E Universal Remote

Cheap Factory Price Fixed e Universal Remote Control Duplicator 433MHZ Face to Face cloner

• I am an international seller

Our shop sells the most popular 3C consumer electronics products,such as mobile phone accessories,computer accessories,game peripherals,smart wearables,and follow the most popular fashion trends. If you like our products,please follow us,become our follower and fan.We will provide you with the most popular products to satisfy your fashion shopping experience.1 remote



Application:



1.sliding gate remote control, auto gate remote control, sliding door remote control, rolling door remote control
2.ceiling fan remote control
3. access system remote control
4.wherever remote control needed




1.CAN  Only Copy Fixed e with 433.92Mhz.



Note:

This product can copy the remote control with the following chip inside:

2260(all manufacturers); 2262(All manufacturers); PT2264, 5326(All manufacturers);SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527(All manufacturers); 1527(All manufacturers); 2240(All manufacturers);, part single chip microcomputer.

If you fail in copying with proper operation, you might have to check whether your device has a chip above.

HCS encryption chip and other encryption chip can not be copied.




(Clone Rolling e Garage DOOR OPENER)

                      Please order:Multi Frequency remote control







Wireless Communication :RF

Package weight : 0.040

Frequency:433 MHz

Package size-length(cm):3

Package size- height(cm) :7

Package size-width (cm):2
Package:Yes 5 PCS remote controls in one box.

Operation method:
1. e pairing (learning)
Place the remote control and the copy remote control as close as possible, first press a on of the remote control, and immediately after the indicator light turns on, press and hold a on of the self-copy remote control for about three seconds, the LED will flash 3 times and then quickly Flashing, it means that the address e of the remote control on has been learned successfully. The other keys are operated in the same way for learning.
2. Clear e
Press the "UP" on and the "DOWN" on at the same time for 2 seconds, the LED light starts to flash quickly. The e has been cleared.
Test whether the existing e of the remote control has been successfully cleared: When you finish the clearing action, you can press any on of the copy remote control. If the LED only flash once at this time, that means The e of the copied remote control has been completely cleared. If the LED still flashes quickly and immediately, the e still exists and needs to be cleared again.
3. Restore the cleared e
The copy remote control has a recovery function. If you accidentally clear the address e of the normal copy remote control during use, you can press the next two ons on the remote control at the same time. After about three seconds, the LED will flash quickly, which means that the cleared address e is successfully restored.

Precautions:
1. Before using our remote control duplicator to copy, first clear the existing e of your exisiting remote control.
2. The self-learing remote control duplicator cannot copy rolling es, such as HCS301.

Note:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
Wireless Communication :RF

Package weight : 0.040

Frequency:433 MHz

Package size-length(cm):3

Package size- height(cm) :7

Package size-width (cm):2
Package:Yes 5 PCS remote controls in one box.














Note:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.