Charging Dock Station For Xbox One Series X S Controller Battery Charger Stand Accessories Support Base Dock Charger

Description:1. For Xbox One Slim,ForXbox one X Controller,ForXbox series Controller.2. This product is also equipped with a USB charging cable, which can be connected to the standard DC 5.0V USB output power supply or the USB interface of the adapter, and connected to the micro interface of the car for charging.(The battery and back cover which don't come with this product cannot be charged by this charger).Charging steps:1. There is a power port at the back of the charger, which can be connected by USB to micro charging cable, and powered by DC 5V 1A power adapter or USB interface power adapter. When charging, the special charging cable comes with this product should be used to connect the power supply.2. Turn on the power and the light fes once. When charging a controller, the red light will be on during charging. When not charging, the green light will be on for a long time.3. As shown in the "product function diagram and use diagram" above, first install the tyx-0608 battery into the controller battery bin, then select the corresponding battery cover from the two battery covers, and then put the controller on the charging base for charging;4. When the controller is charged, the charging indicator will show a long red light; when the controller is fully charged or not charged, it will show a green light.Specification:Type: other game peripheralsApplicable products: For Xbox One Series S/X controllerProduct size: about 9.5*6.7*13.3cmProduct weight: about 210gMaterial: ABSPacking list:1*Dock charger2*Battery Cover1*Battery PackNotes:During charging, if the red light of the charging indicator keeps fing, it means that the battery contact of the controller has not fully contacted with the charging contact spring pin.If the red light keeps fing during charging, it is likely that the surface temperature of the battery is too high. Please remove the controller battery to check whether the temperature is too high, or whether the product is close to the heat source (heating or sunlight exposure); If it is close to the heat source, please move the charging stand to a p far away from the heat source for charging. After the temperature returns to normal, then turn on the power again to charge normally.