Power supply: DC 12V cigarettelighter power: about 70W

Working current: 6A Pressure:0.68MpaFlow: 4L/min

1. 12V DC diaphragm pump. This pump is equipped with a pressure switch. When the switch on the outlet pipe is closed, the motor will automaticallyThe power was cut off and the work stopped.

2. High cost performance.The car wash is designed with DC 12V power supply, which can be directly used in cars, which is convenient, practical, safe and reliable.
 
Maximum flow: 4L/min Dimensions: 160X100X60mm
 

2. Low power consumption:

3. Long service life

4. Corrosion resistance:

II. Technical Indicators:

Voltage: 12V Current: about 5-6A Maximum pressure: 0.68Mpa General pressure: 0.4-0.5 MPA

III. Methods of use:

The direction of the arrow on the pump is the outlet.

2. Wires are not divided into positive and negative poles.

3. The water pump can be placed in any direction.

IV. Considerations for use

1. Do not soak in water.

2. The pressure adjustment screw cannot be adjusted at will. Before leaving the factory, the pressure has been adjusted. If it is adjusted at will, it is easy to increase the reflux pressure and burst the water pipe. 3. The water inlet must be equipped with filtering device, and impurities cannot enter. Otherwise, it is easy to block the water pump, resulting in reduced pressure and even no water.