Car Tyre Inflator Air Pump 12V Light Display

[product features]:
1. This machine is suitable for 12V automobile tires.2, also suitable for motorcycles, bicycles, balls, rubber dinghies, beach floating beds, inflatable toys and so on.3. When you go to work on the highway, in the field or in the morning, the tire suddenly leaks or gets an injection, which can be used in first aid.4. keeping the correct tire pressure can ensure driving safety and save gasoline. It can be used with the car, just in case.5, equipped with a complete set of inflatable nozzles, which can be used for tires, rubber dinghies, air cushions, inflatable toys, balls and many other uses.
[instructions]:
1. Insert the air nozzle on the rubber pipe head directly into the tire valve, and when you hear the sound of air escaping from the tire, it means that the air has been circulated, continue to tighten the air nozzle, at this time the air is no longer released.2. Insert into the DC12V cigarette lighter.3. When inflated, the instrument pointer rises with the tire saturation. When the pointer reaches the appropriate tire pressure (usually the tire pressure of the car tire is 223kpa=35PSI), take out the plug and air nozzle to finish the work.4. Please use professional ball needles and plastic nozzles equipped with this machine to connect with air nozzles to inflate balls and other pneumatic equipment.[notes]: 1. Do not use inflatable tires in large and overweight vehicles, such as trucks, trucks, container trucks, etc. 2. when in use, please start the car engine to increase the power, without consuming the power of the car battery. 3. This machine is limited to DC (DC12V) power supply, but not household high voltage AC (AC220V) power supply. 4. When inflating, please stop for cooling for 10 minutes after working continuously for 10 minutes to prevent damage to the air pump and accessories and prolong the life of the motor. When inflated, the rubber dinghy can work continuously for 30 minutes. 5. Generally, when the tire is inflated, it can reach the normal tire pressure of 30PSI in about 3-5 minutes, while the large tire will take a little longer; if the pointer of the meter rises rapidly to 50-100PSI at the beginning of inflation, it means that the air is blocked and the air does not enter the tire, so it is necessary to unplug the nozzle connector immediately and re-operate, otherwise the motor and instrument will be easily damaged. 6. when using it, do not leave the body, pay attention to the tire pressure at any time, do not be too saturated. 7. After using this machine, the nozzle wrench must be straightened to avoid rubber elasticity fatigue inside. 8. The plug of the air pump is equipped with a fuse. If the air pump does not start, please open the plug to check and replace it (fuse is 10A). 9. This machine should avoid dampness, heavy fall and sand and mud intrusion, avoid children playing with it, so as to avoid damage. 10. The pressure required for each type of tire is different. Please refer to the sign on the side of the tire, or ask the automobile manufacturer.