Car Suction oline Manual S Suction Hose Portable Motorcycle Tank Sucker Large Diversion

【Product number】:

[R-2398A] Suction -Saigang standard model Inlet is about 1.2 meters Outlet is about 0.8 meters

[R-2398B] Suction -Saigang extended version Intake about 2 meters Outlet about 0.8 meters

[R-2397A] Suction -metal standard model Oil inlet about 1.2 meters Oil outlet about 0.8 meters

[R-2397B] sucker -metal extension section, oil inlet is about 2 meters, oil outlet is about 0.8 meters

[R-2340] Suction -extended version with switch, oil inlet is about 2 meters, oil outlet is about 0.8 meters

[R-2341] sucker -blarubber model, oil inlet is about 2 meters, oil outlet is about 0.8 meters

【Instructions】:

1. Hold the two ends of the tube in one hand and the blasuction airbag continuously with the other hand to identify the one with air blowing out, this one is the oil outlet, and the one without blowing is the oil inlet. (Identify the port in the direction of the arrow)

2. Put the oil inlet into the car tank, the oil outlet into the oil tank, and control the distance between the and the height difference between the oil inlet and the oil outlet; (The is thinner and can reach most of the car tank , The tube is nsparent and has a certain degree of softne, easy to control the flow).

3. The next step needs to pay attention to: when you first start ing, you need to hold the oil outlet with one hand, pinch the suction airbag with one hand, and wait for the oline to fill the in the oil inlet section (the section from the oil inlet to the airbag). When the oil outlet is released, oline will flow to the oil barrel athe , and there is basically no need to continuously pinch the airbag.