Car modified saving accelerator secry intake with meter power modified saving accelerator

Car modified saving accelerator secry intake with meter power modified saving accelerator

Installation and debuing:1. Install the -saving force accelerator between the chevalve and the intake manifold of the brake booster vacuum tube;2. Start the engine and adjust the idle speed (rotate the adjusting nut, after the product produces the effect) because the idle speed will be increased after the product action, the engine idle speed should be adjusted to return to the state; 3. Lothe lonut and fix it to the right position

1. It is to draw ex fresh air from the branch line of the engine vacuum tube bow ratio, so as to avoid the problem of torque lo caused by the large overlap of the intake and exhaust valves at low engine speed.2. The prince of secry intake is to e up for the shortage of the vehicle intake, so that the ratio of fresh air into the engine and is higher, so that the combustion value of is increased and the power is greater under the premise of the same unit oil quantity.3. Through reasonable design and calibration language can improve the low speed of the engine to expand the performance, avoid the engine load due to the rod force vector when starting and stopping, and reduce the consumption when driving in crowded urban environment:4 can also e up for the vehicle air conditioning system, electrical system and power steering system on the engine power consumption, so as to save consumption. 5 saving rate in 15%-20%, but also can play a fast start, sensitive accelerator effect. Easy to install regardle of vehicle type.Product features: 1, save cost;2, low speed, high horsepower, torque output; 3. Increase ignition efficiency; 4, prothe engine life; 5. Enhance driving pleasure; 6. Reduce air pollution;