Car Modification Parts Oil Breather Tank Round Oil Recovery Tank Oil Filter Tank 300ML

round Oil Breathable Pot/Modified Oil Pot/Exhaust Modified Breathable Pot/Engine Recycling Oil PotModel: Rastp round Oil Breathable PotColor: Red, Blue, BlackWeight: 1150GCapacity: 300MlEquipped with Two Sets of Interfaces of 11mm and 16mm, the Adaptability Is Greater.Explanation: Perforated Pot Se to Be an Insignificant Thing, Which Is a Tonic for Modern Cars. Nowadays, Cars Are Paying More and More Attention to Environmental Protection. Engine Parts Discharge Those Oily Exhaust es, Especially Crankcase and Cylinder Head. They All Discharge the Exhaust Bato the Intake , ing the Throttle Valve and the Intake Banana Full of Oil Dust, Increasing the Carbon Deposit in the Engine Combustion Chamber and Reducing the Efficiency. the Breathable Kettle Collects These Exhaust es, Because There Is a Temperature Difference, the Oil Will Stay in the Kettle, Greatly Reducing the Pollution of Exhaust es!Function: Because the Oil Composition in the Secry Combustion of the Engine Will Lead to Carbon Deposition on the Valve, and Therefore Adly Affect the Engine, It Becomes Very Meaningful to Reduce the Chance of Oil and Entering the Intake Manifold for Secry Combustion, the Function of the Oil Ventilation Kettle Is to Collect the Oil Steam in the Crankcase. Although the Oil Steam Cannot Be Completely Avoided, It Tries to Reduce the Amount of Steam Entering the Intake Manifold to a Certain Extent and Reduce the Probability of Secry Combustion, protect the Engine.Functions:1. Collect Steam in Crankcase2. Reduce the Amount of Steam Entering the Intake Branch 3. Reduce the Rate of Secry Combustion Machine4. Reduce Carbon Deposit and Protect the EngineInstallation: D1 round Oil Ventilation Pot Is Installed on the Exhaust of the Car, Collecting Oil to Protect the Engine, Reducing Carbon Deposit in the Engine Cabin and Prolonging the Service Life of the Engine! before Installation, Be Sure to Choose the Installation Position First. since the Engine Will Emit Heat While Working, Try to Install the Oil Ventilation Pot Far Away from the Heat Source, in Order to Clean up the Oil-Water Mixture in the Oil Ventilation Pot Conveniently in the Future. When Connecting, Be Sure to Fix It with Clamps and Try to Keep the Whole line in a Vacuum State.