Car Hud 2 Head Up Display Consumption Coolant Voltage Windshield Auto Electronic Overspeed Alarm Accessories

New Car HUD 2 Head Up Display Consumption Coolant Voltage Windshield Auto Electronic Overspeed RPM AlarmIntroduction:HUD short for Head Up Display.It displays driving datas on the front windshield such as speed,RPM, consumption,water temperature,voltage on the car front window gla;avoiding drivers unsafety because of watching the instrument while driving.Drivers can read the driving information instantly , and can always keep the best state on the way with HUD.Features:1). Automatic sensitivity: automatically adjust brightne and darkne2). Engine speed (RPM) display3)..Single driving distance (M/KM) display4).0-100km acceleration time display5). Single driving time display6). Water temperature (°C/°F) display7).Voltage display8).Clodisplay9). consumption display (L/100KM consumption per hundred kilometers/L/H instantaneous consumption)10).Alarm function: (overspeed alarm, speed alarm, water temperature alarm, voltage alarm,igue driving reminder)Specifications:Product name:Car HUD 2 Head Up DisplayModel: M5 blackMaterial: ABS+PCScreen type: LEDScreen size: 8.6*3.7*1.6CMFeature 1: HUDFeature 2: Overspeed Alarm HUDFeature 3: consumption Display HUDFeature 4: Coolant Display HUDApplicable models: carGro weight:150gPackage size:12.5*8.5*4.4CMProduct aceories:M5-HUD*1 line*1Reflective film*1Anti-sl double-sided tape*1Manual*1Please note:Please unplug the HUD,when you won't drive your car for more than a week.Due to the equment for power, standby current is 20ma around,in theory, the use time of a common battery is 1 month,surely,situation of each car is different,it is recommended to unplug the device if your car doesn't been used for a time. Troubleshooting:1.The screen without any display, and no powerPlease do these operations:①Cheif cable is tight enough,pull the cable down several times②Try another car to test③Please maintain the interface if it is damaged.2.When HUD power on, HUD only shows the car voltage and be automatic power off ar 30 seconds driving.HUD just available for cars with 2 and EU- agreement(European:manufactured ar 2003, Other region: ar 2007)HUD Products don't support J and I,if your car is these agreement,please switch to system.3.Wrong operation lead to crIf your car equ with other devices (parking r, TPMS monitor,car window closer,ELM27)If your car has been modified(cenl control ,electronic throttle controller,speed cruise,refresh the computer system,One-clistart-up,keyle entry,e startup)will cause a crash,unplug other devices or Switch to system for display (system key pushed to off)4.Inaccurate SpeedChethe unit whether is correct, km / mph, (speed unit in menu 9)Adjust the vehicle speed. Refer to menu setting 15.Inaccurate consumptionpre the 'M' to enter the menu, short pre the 'M' to change the menu option , ar displayed 2, short pre the '+' or'-' to set the value. Once finished, pre 'M' to save and exit.6.The time is not accurate (because the hine does not contain a battery, the time needs to be calibrated ar the power is off)pre 'M' on to enter into the setting menu, short pre the '-' for 13 times, when 13 is displayed, short pre the 'M' key, short pre '+' to adjust hour, short pre '-' to adjust the minute.ar adjustment,pre 'M' on for 5 seconds to save and exit.7.Automatic start and stop and hybrid vehicles, HUD shut down ar brakingpre and hold the 'M' to enter into the menu setting. Short pre 'M' on and change the menu option to 11, short pre '+' to change the value from 0 to 1. pre and hold the 'M' to save and exit.8..HUD can not auto power off(RPM or Speed not at 0)pre and hold the 'M' to enter into the menu setting. Short pre 'M' on and change the menu option to 11, short pre '+' to change the value to 13.2V or 13.5V. pre and hold the 'M' to save and exit. HUD will turn off ar 3 minutes.9.HUD will automatically restartThe reason is the car voltage higher than the shutdown voltage.pre and hold the 'M' to enter into the menu setting. Short pre 'M' on and change the menu option to 11, short pre '+' to change the value to 13.6V or 13.8V. pre and hold the 'M' to save and exit.Notes:1.Due to the difference between different monitors, the ture may not reflect the actual color of the item. We guarantee the style is the same as shown in the tures.

2. Please allow slight dimension difference due to different manual measurement.