car 2001.1 Motorcycle Rectifier

car 2001.1 Motorcycle Rectifier

1. Weight: 260G
2. Applicable battery: 12V
3. Output voltage: 14.5V
4. Output current: 50A
5. Heat dissipation material: aluminum heat dissipation shell
Installation precautions:
1. The rectifier should be installed in a location with good ventilation and good heat dissipation. High temperature will be generated when the rectifier is working, and poor heat dissipation will damage the rectifier
2. The installation steps of the rectifier are to connect the AC input line, the positive and negative output are not connected, start the locomotive, measure the positive and negative output voltage, and when the voltage range is reasonable, plug in the positive and negative wires, and then test the battery or rectifier If the voltage range is unreasonable, stop using it and give feedback. The entire installation process should be recorded and saved.
3. Note that the rectifier should be closely attached to the frame when installing it, which is good for heat conduction. You can also add thermally conductive glue between the rectifier and the frame
4. Do not press other wires between the rectifier and the frame
5. There should be a fuse protection device between the positive outlet of the rectifier and the battery to prevent excessive voltage from burning out other electrical components when the rectifier is damaged.
Applicable models:
For 2424
For Cann Outland r 1000 2011 2014 278002021
For Cann Outland r 800 2011 2014 278002021
For Can Am Maverick 1000 2014 278002021
For Cann Outland r 1000 2012 2013 278002021
For Cann Outland r 500 2008 2013 710001191
For Cann Outland 800 1906 1914 710000870
For Cann Outland 650 2008 2014 278002021
For Cann Outland r 400 2008 2014 278002021
For Cann Outland Max 400 2008 2014 278002021
For Cann Outland r Max 1000 2013 278002021
For Cann Outland Max 800 2006 2014 278002021
For Cann Outland Max 650 2006 2013 278002021
For Cann Outland r Max 500 2007 2014 278