This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
In stock
Shipped from abroad
Free return within 15 days for all eligible items.Details
xingkongchayuancanyin
60%Seller Score
Be the first to follow
This seller does not have enough history for us to evaluate his performance yet
Feature:
- Support reading MP3 songs in TF-card / U-disk.- Independent adjustment of , Ba and Master volume.- Built-in Bluetooth Receiver and FM Radio Function.- With AUX input port, can be connected to the PC/Phone/CD.- Dual microphone input, adjustable reverb.- Support Voltage AC 110V/ 220V or DC 12V/ 24V.
How to Connect Bluetooth ?
1. Pre ''MODE'' on to switch it to Bluetooth status.2. Open phone Bluetooth, search the Bluetooth device and connect.3. You can use it after pairing succefully.
Description:
Type: Bluetooth Amplifier BoardModel: D10Bluetooth Version: 5.0Audio : 1.0Rated impedance: 4ΩRated Power: 40WPower Range: 30-120W (Deponds on Voltage)Distortion: 0.03%S/N Rate: 92dbBattery of Remote: CR2025 x1(Not Included!)Feature: FM Radio / / BaVoltage: AC 110/220V, DC 12V/24VInput: Bluetooth/3.5mm RCA/U-Disk/TF/MIC
How to use Radio ?
1. Hang up the Radio .2. Pre ''MODE'' on to switch it to the radio state.3. Pre the ''Play'' on to search the entire and save.4. Pre the previous / next ck to switch to use.TIPS: This is not profeional radio, no good effect, pls understand!
TIPS:
1. Support AC 110V / 220V, automatic adaptation.2. If connect to DC 12V-24V, the Current needs more than 3A.Warning: Pls select only one connection method !!!
To match the AMP and Speaker:
1. The impedance of the amplifier is the same as the speaker, can not be too far apart.2. The power of the amplifier is 1.5 times than speaker to obtain a enough sense of strength.=> If the output impedance of the amplifier requires 4-8Ω, the impedance of your speaker should also be 4~8Ω, the sound of 4 s is louder, and the 8 s is smaller;=> If the output power of amplifier is 35W, the speaker should be around 20W. For 1.0 , the power is 20-30W, for 2.0 , it is 2x(20-30)W.=> If the amplifier is full frequency, the wider the frequency response of the speaker, the better, such as 100~18KHz.
TIPS:
● The speakers must be based on impedance and power, regardle of dimensions.● If the sound is intermittent or hoarse during increasing the volume, it means the speaker and amplifier are not matched, Pls use small sound or change a suitable speaker.● Pls e sure that the required power supply is used and working properly.
Package Included:
1 x Bluetooth AMP Board1 x Remote Control1 x AC Power Cable1 x DC Power Line1 x Speaker Connecting Line(Note: Battery is not included, Pls buy it yous)
This product has no ratings yet.
Subscribe to our newsletter
and be the first one to know about our amazing deals!