Home Electronics Accessories & Supplies Audio & Video Accessories Home Audio Crossovers & PartsBuilt-in Bluetooth Subwoofer Amplifier Board 220v 12v 24v for 4 s 8-12inch Speaker Dual Microphone 120W AMP Module

product_image_name-Generic-Built-in Bluetooth Subwoofer Amplifier Board 220v 12v 24v for 4 s 8-12inch Speaker Dual Microphone 120W AMP Module-1

Share this product

Shipped from abroad

Built-in Bluetooth Subwoofer Amplifier Board 220v 12v 24v for 4 s 8-12inch Speaker Dual Microphone 120W AMP Module

GH₵ 299.23

GH₵ 523.9343%

In stock

Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 57.84 to Tema

0 out of 5

(No ratings available)

Variation available

Promotions

Enjoy cheaper delivery fees when you select a pickup station at checkout Free Delivery in Accra and Kumasi for Orders above GHC120. Pick-up stations only! (Excluding Large)

Report incorrect product information

Delivery & Returns

Shipped from abroad

Choose your location

Pickup Station

Delivery Fees GH₵ 57.84

Ready for pickup between 20 December and 27 December if you place your order within the next 11hrs 3mins

Door Delivery

Delivery Fees GH₵ 85.21

Ready for delivery between 20 December and 27 December if you place your order within the next 11hrs 3mins

Return Policy

Free return within 15 days for all eligible items.Details

Seller Information

xxjxhsd

60%Seller Score

Be the first to follow

Seller Performance

This seller does not have enough history for us to evaluate his performance yet

Product details

Feature:

- Support reading MP3 songs in TF-card / U-disk.- Independent adjustment of , Ba and Master volume.- Built-in Bluetooth Receiver and FM Radio Function.- With AUX input port, can be connected to the PC/Phone/CD.- Dual microphone input, adjustable reverb.- Support Voltage AC 110V/ 220V or DC 12V/ 24V.

How to Connect Bluetooth ?

1. Pre ''MODE'' on to switch it to Bluetooth status.2. Open phone Bluetooth, search the Bluetooth device and connect.3. You can use it after pairing succefully.

Description:

Type: Bluetooth Amplifier BoardModel: D10Bluetooth Version: 5.0Audio : 1.0Rated impedance: 4ΩRated Power: 40WPower Range: 30-120W (Deponds on Voltage)Distortion: 0.03%S/N Rate: 92dbBattery of Remote: CR2025 x1(Not Included!)Feature: FM Radio / / BaVoltage: AC 110/220V, DC 12V/24VInput: Bluetooth/3.5mm RCA/U-Disk/TF/MIC

How to use Radio ?

1. Hang up the Radio .2. Pre ''MODE'' on to switch it to the radio state.3. Pre the ''Play'' on to search the entire and save.4. Pre the previous / next ck to switch to use.TIPS: This is not profeional radio, no good effect, pls understand!

TIPS:

1. Support AC 110V / 220V, automatic adaptation.2. If connect to DC 12V-24V, the Current needs more than 3A.Warning: Pls select only one connection method !!!

To match the AMP and Speaker:

1. The impedance of the amplifier is the same as the speaker, can not be too far apart.2. The power of the amplifier is 1.5 times than speaker to obtain a enough sense of strength.=> If the output impedance of the amplifier requires 4-8Ω, the impedance of your speaker should also be 4~8Ω, the sound of 4 s is louder, and the 8 s is smaller;=> If the output power of amplifier is 35W, the speaker should be around 20W. For 1.0 , the power is 20-30W, for 2.0 , it is 2x(20-30)W.=> If the amplifier is full frequency, the wider the frequency response of the speaker, the better, such as 100~18KHz.

TIPS:

● The speakers must be based on impedance and power, regardle of dimensions.● If the sound is intermittent or hoarse during increasing the volume, it means the speaker and amplifier are not matched, Pls use small sound or change a suitable speaker.● Pls e sure that the required power supply is used and working properly.

Package Included:

1 x Bluetooth AMP Board1 x Remote Control1 x AC Power Cable1 x DC Power Line1 x Speaker Connecting Line(Note: Battery is not included, Pls buy it yous)