BSIDE Professional Dial nsistor Triode Capacitance Meter MOS NPN SMD test ESR02 Pro

Descriptions:

This meter is a small tool for the engineer, electronic maintenance and factory. It is very easy to test plug-in and SMD devices, it can also test different kinds of s, triodes, thyristors, MOSFET, enable to ysis the device type, the polarity of the pin, the output HFE, the valve voltage, the junction capacitance of the FET.

Notes:

Before testing the , be sure to discharge it, otherwise it may damage the internal circuit.

If using DC power supply, please choose DC 9V - 12V adapter including 9V and 12V

It is powered by 1pcs of 9V 6LR61 battery, when the battery power is under 6V, please rep it with a new one.

s:

: 0 - 50M Resolution: 0.01

: 25pF - 100mF Resolution: 1pF

Inductor: 0.01mH - 20H Resolution: 0.01mH

ESR: 2uF-50mF Resolution: 0.01

How to use instructions:

Push "POWER / TEST" to power on and start a test, multe measurements can be repeated by this key, auto power off 20 seconds after measurement.

Provide three kinds of socket, each socket pin 1, pin 2 and pin 3 are connected.

There is a table "typical ESR value of electrolytic " at the back, it is for guiding only, these are typical value for standard grade electrolytic at room temperature.

Calibration:

Short the test pin 1, 2, 3 together and push "POWER / TEST" on, then the screen prompts to enter calibration, push the on again within 2 seconds to confirm.

Few seconds latter the screen prompts to release pin 1, 2, 3, release them and wait for calibration finish.

Package Weight: 0.25 kg.

Package SizeL x W x H: 17.50 x 10.00 x 6.00
cm / 6.89 x 3.94 x 2.36 inches.

High-quality ESR test clip.

Package Contents:

1 x ESR02 PRO Dial nsistor .

1 x High-quality ESR test clip（$2.5）.

1 x Color box. 1 x protective bag.

1 x English User Manual