BSD Blind Area Spot Systeme Change Blind Spot Monitoring BSM BSA 24Ghz Millimeter Wave Sens

Product Descrtion

This blind zone detecting system is a vehicle aistance device that helps you safely changing thee during driving & improve driving safety. The LED indicator will alert you when there is a moving object into the vehicle blind area, so that the you can be caution whene changing to avoid the poibility of ffic accident & improve driving safety.The system can monitor the closing objects in the neigre within a range of 3.5*12 meters with speed gap over 0.5m/second. When the moving object enters the blind area, the LED light will be f to alert the driver.If the steering is turned on, the system works ine change aistant mode & the LED light will f rapidly and the beeps three times to alert the driver g careful to change ae.With 2pcs 24GHz microwave r, probe the rear side of the vehicle for moving objects into the blind area of the zone.

ANT

1、Can install on cars with a plasticper only, not work with vehicles with a metalper.2、This item fits for most DC12v sedan, compact, SUV, MPVs, kup etc and profeional audio installer installation is required.3、This system is only auxiliary during driving. Please operate according to the actual ffic conditions. You cannot rely on this product completely in case of accident.4、The ACC cable must be controlled by the ignition switch of the car, if you connect the ACC wire with the constant 12V wire, the device may consume the car battery.5、This product comes with an English user manual and wiring diagram.If you have any requirements for Korean and Ruian user manuals and wiring diagrams, please contact the merchant to request them.

Why did you choose us?

1. We are a manufacturer. Our products are sold directly. We guarantee stable quality and very favorable prices.2. Our products have paed CNAS certification and EU CE certification, so you can buy them safely.3. As a profeional manufacturer of automobile safety products, we can help our buyers to soe all the probl. We are a reliable partner for you.

Product main characteristic

Usage scenario

BSD&LCA Blind Spot Monitoring

During the driving proce of vehicle A, vehicle B cannot be seen from the rearview mirror. When vehicle B enters the area, the alarm light will light up.In this case, vehicle A will turn on the turn signal, the alarm light will f, and a BIBI warning prompt will be iued at the same time

Door opening warning

Door opening warning function, when parking and opening the door, it will warn the driver when a vehicle or pedestrian is detected in the rear to avoid collision with a vehicle or pedestrian in the rear when the door is openedThe product comes standard with the first two door open warning functions. The vehicle works when it is ignited and cannot work when it is turned offIf the vehicle needs to be opened to warn ar it is shut down, (optional) the door opening function is required. This feature is suitable for vehicles with four doors (requires additional modules) and can work within 2 minutes ar closing

Alarm mode

Tier 1 alarm: LED light is constantly onTier 2 alarm: Turn on the turn signal, LED light fes+BIBI sound alarm

Installation diagram

Remove the rearper and determine the installation position of the probe module. The position is located at the aof the rearper of the car. Ar ing, the base of the probe bracket is installed.The angle and height are as shown in the figure below: the module is marked with the head facing up.

*Note:1、 The installation angle and height of the probe are very ant. For the best experience, please install at the above height.2、The probe is vertical and must not be tilted to the ground. The left and right sides are inclined outward by 20 degrees.3、Please use the angle calibration scale and calibration line in the acceory to calibrate according to the calibration method.4、The probe can't be installed on the taillight, the , and the metal rear to avoid the effect.

Installation method

Connection method

Product Pack

Main components: 2 millimeter wave probes, 2 LED lights, 1 Acceories: 1 package of screw and tie-up, 1 wires, 1 Instructions, 1 auxiliary card for installation，2 bracket