Bluetooth 5.0 Audio Receiver Mini Bluetooth Stereo AUX USB for PC Headphone Car Handfree

Instructions for use: Charging:1. Use one end of the provided USB cable to connect to the mini-USB input interface of this Bluetooth music receiver, connect the other end of the USB cable to your computer, notebook or USB power converter. When the LED light of the Bluetooth music receiver turns red, it means that it is charging.3. When charging is over, the red LED light wilo out, and it can provide up to 8 hours of play time when fully charged.

Pairing:1. Enter pairing mode, pre and hold the switch on for 5 seconds until the red and blue LED lights f at the same time2. Find this bluetooth music receiver on your mobile phone or related nsmitter3. At this time, the device is paired and connected. Ar the connection is succeful, the LED light of the Bluetooth music receiver turns blue and fes slowly4. For some devices that require a pairing paword, please enter "0000"5. Once the pairing is succeful, the device can be powered off, and there is no need to re-pair for the connection.

If it has been paired:1 Power on: Pre and hold the switch on on the Bluetooth music receiver for 3 seconds until the LED light turns blue and fes to complete the boot2. Shutdown: Pre and hold the switch on for 5 seconds, at this time the red LED light will be on for a time, then turn off.

Note: Please read the instruction manual of your nsmitter or mobile phone carefully to find out how to use its Bluetooth wirele technology;

If you want to use this bluetooth music receiver to connect to another phone or nsmitter, you have to pair it again. play music:

1. Use the provided audio cable and connector to connect this Bluetooth music receiver to your home audio or car stereo device2. Please confirm that the nsmitter (Bluetooth audio receiver, mobile phone, or other related devices) is turned on and paired with the Bluetooth music receiver, and the device is within 10. Play music at this time, the music will be wirelely nsmitted to the Bluetooth music receiver via Bluetooth

NOTE: If you cannot listen to music:Please e sure your stereo system is connected to the bluetooth music receiver and cheto e sure your audio volume is not turned down or muted.

Handsfree:1 When your mobile phone uses a Bluetooth microphone by default, you can use the built-in MIC to achieve hands-free calling when a phone is connected.2. When the phone calls, pre the power on once to answer the voice call3. Ar the call is completed, the status indicator before automatically switching to the mobile phone displays:

1 Pairing or establishing a connection: red and blue LED lights blink simultaneously

2 Once connected and playing: blue LED light blinks every 3 seconds3. Sleep mode: blue LED light fes every 5 seconds4. Charging: the red LED light is always on5. Charging and connected: The red LED light fes slowly Troubleshooting:

The connection of the Bluetooth music receiver is based on the completion of pairing, and the connection interruption may be due to the following reasons:a. The distance between the sman of the equment is more than 33 feet (10 meters), or there are other obstacles in the middle (such as: walls, furniture, etc.)b. One or both of them are turned off, or it may be due to a laof power

c. The connection is not made within the specified time, the device is in sleep mode or the power is turned off. Turn off and on the device to reconnect, follow the steps below:1. Restart the music receiver and nsmitter2. Reconnect and pair ar restarting3. Power up the music receiver and nsmitter again FCC certification information

Our music receivers for home and office use are FCC certified. this paragraphThe device complies with Part 15 of the FCC specification. The equment operating room is based on the following two conditions:(1) This device its may not cause any harmful interference, and

(2) this device may receive other interference, including interference that may interfere with the normal operation of the device.

Specifications:

Product material: plastic + metal

Product color: black

Interface type: 3.5mm

Bluetooth version: Bluetooth 5.0

Features: Support for connecting headphones, connecting mobile phones, connecting speakers, connecting cars

Product size: 5*2*1cm

Product bare weight: 11g (Bluetooth receiver + metal adapter)

Total weight: 25g (Bluetooth receiver + metal adapter + wire + manual + PP bag pack)

Product pack: sealing PP bag

Product features: Bluetooth receiver, car Bluetooth receiver, car Bluetooth receiver, AUX Bluetooth receiver, audio adapter

Product included:

1×Bluetooth Receiver

1×3.5mm metal adapter

1×5cm USB charging cable

1× Manual