Specifications:
Material:PVA
Style: blank film
Size: 0.21x10m/roll(can be cut A3,A4 size)
Thickness: 0.01mm
:White
Type:Water transfer
Envronment Inquirement:
Temperature: 22 degree. Humidity: 55%
Application Industry: motorcycle, automobile, toys, shoes, phone case, etc.
How to use:
1.Print your picture or pattern in your inkjet printer. Use " mirror printing" and " highest quality"
2.Wait till the ink is totally dried and apply our activator A to protect the ink.
3.Tape the borders of the film to limit the expansion of the film when placed on the water surface and pull off the stabilization paper of the backside.
4.Place the film on the water and fix it.
5.Apply the second activator B to liquify the film and wait about 45 seconds till the film is completely liquified.
6.Dip the object into the film with an angle of 35-45 degrees to avoid air bubbles.
7.Take out the object, flush away overhang parts of the film, wait till it is dry and apply a clear top as protection.
Notice
- Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.
- Please allow 1-3CM differs due to manual measurement.
- Due to the different display and different light, the picture may not reflect the actual of the item. Thanks for your understanding.
? Detail Image
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a