Black Full Metal Digital Lava Wrist Watch Men Red/Blue LED Display Men's Watches Gifts for Male Boy Sport Creative Clock

Black&blue =black with blue light

Black&red =black with red light

Silver&blue =silver with blue light

Silver&red =silver with red light

Every color have 2 size about Dial(Width):2.5cm/2.1cm

1cm=0.394 inch

Japanese-inspired red LED digital watch.Top and bottom row LED lights for time and date display.

, exclusive fold over lock design.

Time and Date function.

This size is more suitable for Man/Boy.

Watch Dial Size: 5.0x2.5/2.1x1.1cm(LxWxH)

Wristlet Size: 185 mm with 18 segments for wrist adjustment

Item Size: length 21cm Width 2.4cm

Screen: Top and bottom row LED lights for time and date display

Clasp: Exclusive fold over lock design

This watch is not waterproof

Power: CR2016 (x1) pre-installed, please change the batteries when the luminosity is too weak.

Led Watch Instruction Manual:

1.Power:

Insert one CR2032 battery to power the device.

Change the batteries when the luminosity is too weak.

2.Reading Time,Date,Seconds:

1)Pre the button A once The upper two characters display from 0 to 23 hours. The lower two characters display from 1 to 59 minutes.

2)Pre the button A twice The upper two characters display from 1 to 12 months. The lower two characters display from 1 to 31 days.

3)Pre the button A three times The lower two characters display the seconds

3.Setting Hour,Minute.Month,Day,Year,12Hr/24Hr Mode:

Push the button A to display Time,then push the button B to enter set mode (hours are flashing). Pre button A to set the hours.Push the button B to confirm the hour and to cnange to the miuntes(flashing).

Pr button A to set the minutes.Push the button B to confirm the minutes and to change to the month(flashing).

Pre button A to set the month.Push the button B to confirm the month and to change to the days(flashing).

Pre button A to set the days.Push the button B to confirm the days and to change to the year(flashing).

Pre button A to set the year.Push the button B to confirm the year and to change to the i2Hr/24Hr Mode(flashing).

Pre button A to set the 12Hr/24Hr Mode.Push the button B to confirm the 12Hr/24HrMode.

4. Battery advice:

Repment of battery/ batteries (we recommend by the trade). Please rep the batteries as follows:

Remove the screws on the back of the watch case and/or open the watch case.

If neceary lift the metal clip that fixes the batteries at end with a thin pointed tweezers or screwdriver and remove it.

Rep the batteries considering the polarity. Close the watch case and if neceary tighten the screws.

Quantity: 1PC

Note:

Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!!