Aux Usb Nexia Bluetooth nsmitter Wireless for Audio Receiving Automotive Handsfree Calls Aux Turn 3.5 Speakers

Aux Usb Nexia Bluetooth nsmitter Wirele for Audio Receiving Automotive Hands-free Calls Aux Turn 3.5 SpeakersProduct introduction:The Bluetooth music receiver (hands-free) is a high-tech wirele product that can receive music from a mobile phone or a Bluetooth-enabled nsmitter. This music receiver can be used with almost all audio receivers with input plugs, including car devices. You can listen to the music received from your smart phone and MP3 in your home speaker or car audio system. Enjoy the melodious car music and call solutions, and use your smartphone to e calls and enjoy music through the car stereo. With a single tap, you can e hands-free calls, enjoy music stored on the phone, and even play Internet radio. The product has an embedded echo cancellation microphone, which can easily switch between music and phone calls with just one on.

Pack acceories:1. Bluetooth music receiver2. USB cable3.3.5 Metal head4. InstructionsCharging:1. Use one end of the provided USB cable to connect to the mini-USB input port of this Bluetooth music receiver2. Connect the other end of the USB cable to your computer, notebook or USB power converter. At this time, the LED light of the Bluetooth music receiver turns red, indicating that it is charging.3. When the charging is over, the red LED light will go out, and it can provide up to 8 hours of playing time when fully chargedpair:1. Enter the pairing mode, pre and hold the switch on for 5 seconds until the red and blue LED lights f at the same time2. Find the Bluetooth music receiver on your mobile phone or related nsmitter3. At this time, the device is paired and connected. After the connection is succeful, the LED light of the Bluetooth music receiver turns blue and fes slowly4. For some devices that require a pairing paword, please enter "0000"5. Once the pairing is succeful, the device can be powered off, and there is no need to re-pair it next time you connectIf paired:1. Power on: Pre and hold the switch on on the Bluetooth music receiver for 3 seconds until the LED light turns blue and fes to complete the power on2. Shut down: Pre and hold the switch on for 5 seconds, at this time the red LED light will be on and then turn off.Note: Please read the instruction manual of your nsmitter or mobile phone carefully to find out how to use its Bluetooth wirele technology;If you want to use this Bluetooth music receiver to connect to other mobile phones or nsmitters, you must re-pair.play music:1. Use the provided audio cable and connector to connect the Bluetooth music receiver to your home audio or car stereo device2. Please e sure that the nsmitter (Bluetooth audio receiver, mobile phone, or other related devices) has been turned on and paired with the Bluetooth music receiver, and the device is within 10. Now that the music is playing, the music will be wirelely nsmitted to the Bluetooth music receiver via BluetoothNote: If you cannot listen to music:a) Please e sure your stereo system has been connected to the Bluetooth music receiverb) Check to e sure that your audio volume is not adjusted to the minimum or muted.Handsfree:1. When your mobile phone uses a Bluetooth microphone by default, hands-free calls can be realized through the built-in MIC when a phone is connected2. When a mobile phone calls, pre the power on once to answer the voice call3. After the call is completed, it will automatically switch to the previous state of the phoneIndicator light shows:1. Pair or establish a connection: the red and blue LED lights f at the same time2. Once connected and playing: the blue LED light fes once every 3 seconds3. Sleep mode: the blue LED light fes once every 5 seconds4. Charging: the red LED light is on5. Charging and connected: the red LED light fes slowlyTroubleshooting:The connection of the Bluetooth music receiver is established on the basis of the completion of the pairing. The connection interruption may be due to the following reasons:The distance between the equipment is more than 10 meters, or there are other obstacles (such as walls, furniture, etc.)One or both of them are turned off, or it may be because of no electricityThe connection is not made within the specified time, the device is in sleep mode or the power is turned off. Turn off and turn on the device to reconnect, follow the steps below:Restart the music receiver and senderReconnect after restarting, pairingPower up the music receiver and nsmitter again