ATX3.0 Graphics Card 12VHPWR Connector 12+4PIN 600W Power Adapter Elbow Head For RTX 4090 4080 4070 3090 Ti Graphics Card

ATX3.0 Adapter 16Pin 600W 180 Degree STD/RVS DIY Heat Diipation Silicone Sheet for RTX 4090 4080 4070 Ti 3090 Ti Graphics CardFeature:1. High Quality Material and Workmanship:Aluminum alloy shell heat diipation back plate, proce, increased heat diipation area by 1%; Adopting gold-plated extension terminals, containing heat diipation silicone sheets, and the entire piece of phase change silicone grease, it can evenly nsmit heat to the backplane! 2oz , double thickne copper coating, ensuring greater current flow and safety first!2. Up to 600W Output:This adapter supports RTX4090 with a maximum output of 600W. It is designed with 2oz copper plating and multi layer boards, effectively diipating heat and stably nsmitting current. Long term use of power output exceeding 600W may cause equipment damage. Pay attention to maintaining a good ventilation environment inside the chais3. 180 ° Turn Design:Connect the power cord and interface, without causing preure on the graphics card interface, and ensure long-term stable use. This design will reduce the preure on connectors and cables, ing them safer during aembly and long-term use, effectively avoiding the difficulty of cable arrangement caused by the graphics card bracket, and beautifying the power wiring of the graphics card4. Strong Compatibility:Designed specifically for RTX 4090 4080 4070 Ti 3090 Ti graphics cards, please note that the adapter in different directions may be suitable for different graphics card brands!5. Satisfaction Guarantee:We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any iues, inquiries or need aistance, please feel free to contact us directly.Specification:Certification: CEOrigin: Mainland ChinaMaterial: Aluminum alloy++tinned copperColor: Black, Silver (optional)Direction: Forward STD, Re RVS (optional)Interface: 16Pin (12+4PIN) male and female connectorsPower: 600WQuantity: 1 PCSSize: About 31x21.5x21mm/1.22x0.84x0.852inchWeight: 15gCompatibility:Forward STD:The four pin interface is not close to the backplane and is selected in the forward directionFor example: for ASUS ROG STRIX RTX4090, for ASUS TUF RTX 4090 GAMINGRe RVS:For example: for Game GeForce RTX 4090 Vulcan OC, for GIGABYTE GEFORCE RTX 490 MASTER, for GIGABYTE GEFORCE RTX490 GAMINrchase instructions:Step 1: Confirm the number of pins on the graphics card power interfaceStep 2: Confirm the orientation of the interfaceAttention: Please pay attention to the direction of the connector before purchasing (forward or re)Kind reminder: This connector is 16Pin (12+4PIN)!Special reminder:Please ensure that the adapter is fully inserted into the and there should be no gaps. The board is designed with overheating protection, and it is not recommended to use graphics cards with overclocking power consumption higher than 600W; Please ensure that the power cord connector is fully inserted into the adapter (bending fro5mm of the connector) to avoid the connector not g fully inserted due to exceive bending angle of the power cord. This can cause uneven current load on the terminals and damage due to heat accumulation during full load operation of the

Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.

1 x Adapter[relateproductdetail/]