Applicable to Samsung S24 Tempered Film UV Full Glue Note20ultra Mobile Phone Film S23 Glass Protector S22 Curved Screen

Additional Tax Points for Invoicing, Contact Customer Service for Details!

Because of the Relationship between Ultrasonic Fingerprint Unlocking, All Tempered Film Products Are Not Guaranteed to Unlock Fingerprints. Do Not Shoot If You Mind.

Users Who Buy It for the First Time Must Buy Black Light Bulb, Otherwise the UV Film Cannot Be Pasted without Black Light Bulb. The Whole Set Has Small Light Delivered with Packaging, and Headlights Are Also Sold behind the Link. You Can Also Buy a Professional Film Anti-Slip Mat to Balance the Phone. UV Anti-Peep Film Fingerprint Hole Needs Film Video, Please Contact Customer Service

A Little Experience of My Own Film: It Is Actually Very Easy to Paste. Put the Phone on the Tissue Or Non-Slip Mat First, and Clean the Screen with Cleansing Kit. after the Alcohol Evaporates, use Vacuum Stickers to Absorb the Dust of the Screen, Start to Put the Glue, Put the Glue on the Screen, Upper, Middle, Lower, 3 One Position, Then Tear off the Protective Layer of the Film, Put the Film on, when I Put It, I Found Bubbles. I Need to Puncture the Bubbles First and Then Put the Film on It. When He Automatically Runs out the Glue to Cover the Whole Screen, You Can See Where the Glue Leaks out of the Phone, wipe It off Gently with Paper Towel Or Cotton Swab. Don't Move the Phone. If You Move the Phone, Glue Will Leak. Cleaning Is Very Troublesome. Then Start to Use Black Light Bulb up and down for about 10 Minutes, Wait for One for 5-10 Minutes, and Then Irradiate for about 10 Minutes, Then You Can Use the Mobile Phone, Very Perfect. Special Reminder: a Small Number of People May Have Skin Allergy to Glue, Please Wear Gloves.
In Addition, Some Customers Have Not Pasted It Well Or Posted Too Much over Cemented, Resulting in Uneven Glue, Resulting in a Rebound of White Edges Within a Few Days after Pasting, if This Happens, You Can Put the Glue Again for New Pics Times. as Long as the Tempered Film Is Not Broken, It Can Be Attached Twice. I Have Tried It Myself, and the Second Fit Is Perfect. You Can Prepare More UV Glue at Home at Ordinary Times.

Special Reminder: If the Customer Uses a Small Black Light Bulb, It Is Recommended That the Customer Irradiate Back and Forth for More than 10 Minutes. It Must Be More than 10 Minutes. The Glue Should Be Completely Cured, in This Way, 1‰ Chances Can Be Avoided Because the Glue Is Not Completely Cured and Cannot Be Torn off, Which Will Be Very Troublesome. If You Have Time, You Can Irradiate It for Another 20 Minutes. We Also Have a Link to Sell the Non-Slip Mat in the Video. The Non-Slip Mat Is for Sale, Not for Free. We Also Have a Link to Sell the Large Black Light Bulb in the Video. The Package Is Equipped with Small Black Light Bulb.

Disclaimer on Uv Toughened Film

Dear Uv Tempered Film Users:

Hello! after Testing by Our Engineers, It Was Found That All Uv Glues Had Certain Damage to Plastic and Leather Products. Here We Make the following Statement:

1. 1. The Main Material of Glue Used by Our UV Curved Screen Tempered Film Is Resin, Equipped with UV Oil, Glue Will Have a Certain Chemical Effect When It Sees Light, for Example, Some People with Sensitive Skin Should Clean Their Hands Immediately after Using It Or Use It Carefully [with Gloves]. [If Some People Are Allergic, Please Wear Gloves before Using It]].
2. 2. When Fitting the UV Curved Screen Tempered Film, Use Dust Keepmoving 1991 to Hold the Phone Charging Port, Handset Hole, Speaker and Other Holes, and Avoid Unpredictable Losses Caused by Glue Entering. During the Fitting Process, the Phone Is Damaged Due to the Glue Entering the Phone Charging Port, and the Handset Hole, Speaker and Other Holes. All Responsibilities Shall Be Borne by the Fitting/Installation Personnel.
3. 3. Mobile Phone Cover Plate Is Leather [for Example, Huawei Mate30pro Porsche Edition Back Cover Is Leather] Please Take Protective Measures on the Back of the Glue That Accidentally Leaks in. If the Back Cover of the Leather Phone Is Damaged by Phone Case Due to Glue during the Bonding Process, All Responsibilities Shall Be Borne by the Fitting/Installation Personnel.
4. 4. Xiaomi 10/Xiaomi 10pro Has No Waterproof Function. If Glue Enters the Phone and Causes Damage, All Consequences Shall Be Borne by the Fitting/Installation Personnel. [Pay Attention to Glue Usage]]
5. 5. Suggestion: When Glue Overflows. Wipe Clean with Cotton Swab Or Tissue in Time.

Hereby Declare!

Shenzhen Hua Wanjia E-Commerce Operation Center

Precautions for UV Film Film

1. Avoid Film in Places with Strong Sunlight. Make Sure to Clean up the Screen of Your Mobile Phone before Film to Ensure That There Is No Dust Or Residue.

2. Use the Dust Sticker in the Film Kit to Stick the Phone Button to Avoid Glue Entering the Button. Users of Mate20pro Also Need to Stick the Handset to Avoid Loss Caused by Glue Entering the Handset.

3. When Pouring the Glue, First Turn the White Bottle Cap a Few Times, Then Loosen the Back Black Bottle Cap a Little, and Then Squeeze the Glue in the Middle of the Screen (in the Upper Position). It Is Best to Squeeze It into 3 One Points in the Upper, Middle and Lower Positions, for Samsung S10 and S10plus Users, the Glue on the Fingerprint Unlocking Part Should Be Squeezed Thinner as Much as Possible, and the Film Began to Be Placed Only after Confirming Again That There Was No Dust.

4. Gently Put down the Tempered Film and Let the Glue Flow Slowly. Be Careful Not to Let Go So Quickly. When the Glue Is Absorbed by Almost Half, Let Go Again, after All the Glue Flows in Place, Clean up the Excess Glue with Paper Towel Or Cotton. Connect the Phone Charging Cable to Black Light Bulb and Start to Irradiate the Tempered Film. First, It Will Be Irradiating around for 3-5 Minutes, Then It Will Be 2-3 Minutes in the Middle of the Screen, then Irradiate for 3-5 Minutes along the Surrounding Area, Then Shine for 2-3 Minutes in the Middle of the Screen, and Try to Wait until the Glue Solidifies before Using.

5.Special Reminder: a Small Number of People May Have Skin Allergy to Glue, Please Wear Gloves.    

6 Some Customers Report That There Are White Edges after Pasting for a Few Days. If There Is Such a Situation, You Can Put the Glue Again for New Pics Times. as Long as the Tempered Film Is Not Broken, It Can Be Completely Attached Twice. I Have Tried It Myself, and the Second Fit Is Perfect. You Can Prepare More UV Glue at Home at Ordinary Times.

Uv Anti-Peep Film Needs to Drop Glue on the Fingerprint Unlock Hole to Integrate the Video on the Details Page of Our Computer.

UV Film UV Glue Cleansing Kit Option Is without Outer Packaging and Purple Curing Lamp

UV Film [Complete Set with Outer Packaging] Option Is That the Whole Set Contains UV Film Glue Cleansing Kit Outer Packaging Purple Curing Small Light

in Terms of Outer Packaging, We Use House Brand Youben Brand Outer Packaging

Professional Anti-Slip Mat Can Make the Mobile Phone Balance Not Inclined When the Film Is Applied, Which Helps the Glue Flow Evenly. We Sell It in the Link, and the Price Is 5 Yuan, customers Who Buy More than 30 UV Films at a Time Can Also Contact Our Customer Service Staff to Give You a Professional Non-Slip Mat.

This Is a Purple Light Curing Medium Lamp with 6-8 Lamp Beads. We Sell It in the Link. The Price Is 5 Yuan. Customers Who Buy More than 30 UV Films at a Time Can Also Contact Our Customer Service Staff, give You 1 One 6-8 Lamp Beads of Purple Light Curing Medium Light.

This Is a Large Purple Light Curing Lamp with 15 Lamp Beads. We Also Sell It in the Link. The Price Is 10 Yuan. Customers Who Buy More than 50 UV Films at a Time Can Also Contact Our Customer Service Staff, give You 1 One 15 Lamp Beads of Purple Light Curing Large Lamp.

This Is the Purple Light Curing Super Large Signal Lamp of 20 Lamp Beads. We Also Sell It in the Link. The Price Is 25 Yuan. Customers Who Buy More than 100 UV Films at a Time Can Also Contact Our Customer Service Staff, give You 1 One 20 Lamp Beads of Purple Light Curing Super Signal Lamp.








Product Classification We Have Curved-Surface Steel Film Links in UV Film One That Sell UV Glue. Customers Who Do Not Use Enough Glue Can Buy It.

No Baking Fingerprint Oil, Some Mobile Phones Often Stick UV Film, Which Will Cause the Original Screen Glass to Be Too Astringent. Use Baking-Free Fingerprint Oil before Applying the Film, Which Can Keep the Lubrication of the Oleophobic Layer of the Screen. Avoid the Situation That the UV Film Cannot Be Torn off Later.